Quickly connect SwitchBot to UbiBot - IFTTT

Triggers (If this)

Temperature Rises above or Drops below

This trigger monitors the UbiBot device's built-in temperature sensor readings and fires whenever the temperature rises above or drops below the value you provide.
ハブ２のタッチボタンを押す

SwitchBotハブ２のタッチボタンを押すことをトリガー条件として設定することが可能です。例えば：ハブ２の左ボタンを押すと、SwitchBotスマート電球をオンにします。
(Universal) Any Channel Field Value Rises above or Drops below

This trigger monitors the UbiBot device's selected Field readings and fires whenever the reading rises above or drops below the value you provide.
Hub 2's touch buttons pressed

This trigger fires when one of the touch buttons of your Hub 2 is pressed. E.g. when the left touch button is pressed, turn on SwitchBot Color Bulb.
Humidity Rises above or Drops below

This trigger monitors the UbiBot device's built-in humidity sensor readings and fires whenever the humidity rises above or drops below the value you provide.
電源の変化

プラグミニの状態をアクション実行条件として設定できます
Light Rises above or Drops below

This trigger monitors the UbiBot device's built-in light sensor readings and fires whenever the light level rises above or drops below the value in lux you provide.
水漏れセンサーの状態

水漏れセンサーの水漏れ/水位低下状態をトリガー条件として設定することが可能です。
Voltage Rises above or Drops below

This trigger monitors the voltage of the batteries or USB power and fires whenever the voltage rises above or drops below the value you provide.
Power changes

You can choose Plug Mini's behaviour as a trigger condition
External Power Supply is Up or Down

This trigger monitors the status of the external power supply (USB) that connects to the device and fires whenever the power supply is up or down.
Carbon dioxide changes

Whenever a preset carbon dioxide change detected, SwitchBot meter pro will try to trigger the service. E.g. if the carbon dioxide is too high, turn on SwitchBot air purifier.
Device is offline

This trigger fires when your UbiBot device is offline.
ロボット状態変更

このトリガーはロボットの状態が変更した時に実行します
Motion is Detected or Undetected from Motion Sensor

This trigger monitors the status of the motion sensor and fires whenever motion is detected or undetected.
Water Detector State

You can use the Water Detector state as a condition to trigger an automation.
External-DS18B20-Temperature-Probe-1 Rises above or Drops below

This trigger monitors the UbiBot device's external DS18B20 temperature probe 1's readings and fires whenever the temperature rises above or drops below the value you provide (Available for WS1 and WS1-PRO devices).
温度・湿度の変化

温度・湿度の変化を検出された時、SwitchBot温湿度計（メーター）が「THAT」サービスをトリガーにします。例えば、温度が27度より高い時、SwitchBot Hub PlusでエアコンをONにします。
External-DS18B20-Temperature-Probe-2 Rises above or Drops below

This trigger monitors the UbiBot device's external DS18B20 temperature probe 2's readings and fires whenever the temperature rises above or drops below the value you provide. (Available for WS1-PRO devices)
Robot status changed

This trigger fires when the status of your SwitchBot Robot Vacuum Cleaner changed
External-TH30S-Probe-Temperature Rises above or Drops below

This trigger monitors the UbiBot device's external TH30S probe Temperature readings and fires whenever the Temperature rises above or drops below the value you provide (Available for WS1-PRO and GS1 devices).
Temperature or humidity changes

Whenever a preset temperature and/or humidity change detected, SwitchBot Thermometer & Hygrometer (the Meter) will try to trigger the service. E.g. if the temperature is too high, turn on AC with the SwitchBot Hub Plus (the Hub Plus).
External-TH30S-Probe-Humidity Rises above or Drops below

This trigger monitors the UbiBot device's external TH30S probe Humidity readings and fires whenever the Humidity rises above or drops below the value you provide (Available for WS1-PRO and GS1 devices).
動体が検出された、または検出されない

動体検知の結果によって、SwitchBot人感センサーがサービスをトリガーします。
External-Soil-Probe-Moisture Rises above or Drops below

This trigger monitors the UbiBot device's external Soil Probe Moisture readings and fires whenever the moisture level rises above or drops below the value you provide.
Motion detected or no motion detected

When Motion Sensor detected motion or no motion, the SwitchBot motion sensor will try to trigger the service.
External-Soil-Probe-Temperature Rises above or Drops below

This trigger monitors the UbiBot device's external Soil Probe Moisture readings and fires whenever the temperature level rises above or drops below the value you provide.
開閉と動体を検知する

開閉状態の検知結果によって、SwitchBot開閉センサーがサービスをトリガーします。
External-PT100-Probe Temperature Rises above or Drops below

This trigger monitors the UbiBot device's external PT100 probe Temperature readings and fires whenever the Temperature rises above or drops below the value you provide.
Contact and Motion Detection

When Contact Sensor detected door/window opened or closed or left open, the SwitchBot contact sensor will try to trigger the service.
Vibration Index Rises above or Drops below

This trigger monitors the WS1 vibration sensor readings and fires whenever the vibration index rises above or drops below the value you provide.
ロック状態変更

このトリガーはロックの状態が変更した時に実行する
Carbon Dioxide (CO2) Rises above or Drops below

This trigger monitors the UbiBot device's connected Carbon Dioxide (CO2) probe readings and fires whenever the result rises above or drops below the value you provide.
Lock status changed

This trigger fires when the status of your SwitchBot Lock is changed.

Queries (With)

Actions (Then that)

IFTTT helps all your apps and devices work better together