This trigger monitors the UbiBot device's selected Field readings and fires whenever the reading rises above or drops below the value you provide.

This trigger fires when the specified device/group is turned on.

This trigger monitors the UbiBot device's built-in temperature sensor readings and fires whenever the temperature rises above or drops below the value you provide.

This trigger fires when the specified device/group is turned off.

This trigger monitors the UbiBot device's built-in humidity sensor readings and fires whenever the humidity rises above or drops below the value you provide.

This trigger fires when user unlocking the lock, his password or fingerprint identification or card is confirmed.

This trigger monitors the UbiBot device's built-in light sensor readings and fires whenever the light level rises above or drops below the value in lux you provide.

This trigger fires when the specified camera detects motion. To use this trigger, camera’s motion detection should be turned on.

This trigger monitors the voltage of the batteries or USB power and fires whenever the voltage rises above or drops below the value you provide.

This trigger fires when the specified camera detects sound. To use this trigger, camera’s sound detection should be turned on.

This trigger monitors the status of the external power supply (USB) that connects to the device and fires whenever the power supply is up or down.

This trigger fires when someone input incorrect password repetitiously.

This trigger fires when your UbiBot device is offline.

This trigger fires when residual electricity in the lock under threshold.

This trigger monitors the status of the motion sensor and fires whenever motion is detected or undetected.

This trigger fires when the door sensor is open.

This trigger monitors the UbiBot device's external DS18B20 temperature probe 1's readings and fires whenever the temperature rises above or drops below the value you provide (Available for WS1 and WS1-PRO devices).

This trigger fires when the door sensor is closed.

This trigger monitors the UbiBot device's external DS18B20 temperature probe 2's readings and fires whenever the temperature rises above or drops below the value you provide. (Available for WS1-PRO devices)

This trigger fires when PIR detects person.

This trigger monitors the UbiBot device's external TH30S probe Temperature readings and fires whenever the Temperature rises above or drops below the value you provide (Available for WS1-PRO and GS1 devices).

This trigger fires when water leak detected.

This trigger monitors the UbiBot device's external TH30S probe Humidity readings and fires whenever the Humidity rises above or drops below the value you provide (Available for WS1-PRO and GS1 devices).

This trigger fires when water sound and light detected.

This trigger monitors the UbiBot device's external Soil Probe Moisture readings and fires whenever the moisture level rises above or drops below the value you provide.

This trigger fires when sensor shake detected

This trigger monitors the UbiBot device's external Soil Probe Moisture readings and fires whenever the temperature level rises above or drops below the value you provide.

This trigger monitors the UbiBot device's external PT100 probe Temperature readings and fires whenever the Temperature rises above or drops below the value you provide.

This trigger monitors the WS1 vibration sensor readings and fires whenever the vibration index rises above or drops below the value you provide.

This trigger monitors the UbiBot device's connected Carbon Dioxide (CO2) probe readings and fires whenever the result rises above or drops below the value you provide.

This query returns a list of times when the sensor detected a water leak.

This query monitors the WS1 vibration sensor readings and returns a list of whenever the vibration index rises above or drops below the value you provide. Note: this query will only return future events after this Applet is created.

This query returns a list of times when the door sensor was closed.

This query monitors the UbiBot device's built-in light sensor readings and returns a list of whenever the light level rose above or dropped below the value in lux you provide. Note: this query will only return future events after this Applet is created.

This query returns a list of times when the door sensor was open.

This query returns a list of when the UbiBot device's external Soil Probe Moisture level rises above or drops below the value you provide. Note: this query will only return future events after this Applet is created.

This query returns a list of when PIR detected person.

This query returns a list of when your UbiBot receives new sensor data. The raw data can be exported to other services, such as Google Spreadsheet.

This query returns a list of times when the specified device/group was turned off.

This query returns a list of when the specified device/group was turned on.

This query returns a list of times when someone input an incorrect password repetitiously.

This query returns a list of when a Camera detected motion. To use this query, Camera motion detected should be turned on.

This query returns a list of times when the specified camera detected sound. To use this query, camera’s sound detection must have been turned on.

This query returns a list of when sensor detected a shake

This query returns a list of when a user unloocked the lock and his password, fingerprint identification, or card was confirmed.

This query returns a list of when water sound or light were detected.

This query returns a list of when residual electricity in the lock dropped below the threshold. Note: this query will only return future events after this Applet is created.

This action will turn on the device/group of your choosing.

Send Action Command to Any Target Channel

This action will turn off the device/group of your choosing.

Send Action RAW Command to Any Target Channel

This action will activate the specified scene.

Send Action Command to Turn On or Off your UbiBot Smart Plug

This action will set your light to a specified brightness.

Send Action Command to Turn On or Off your UbiBot Network Relay Switch

This action will set the light to specified color.

This action will set your AC to Cool Mode.

This action will set your AC to Heat Mode.

This action will set your AC to a specified temperature by remote controller.

This action will turn on the oscillation function of your fan by IR remote controller.

This action will turn off the oscillation function of your fan by IR remote controller.