Switch off a SmartLife plug according Switchbot humidity sensor status
Start today
Triggers (If this)
Queries (With)
Actions (Then that)
Popular Smart Life and SwitchBot workflows and automations
Useful Smart Life and SwitchBot integrations
Triggers (If this)
-
ハブ２のタッチボタンを押す
SwitchBotハブ２のタッチボタンを押すことをトリガー条件として設定することが可能です。例えば：ハブ２の左ボタンを押すと、SwitchBotスマート電球をオンにします。
-
Device or group is turned on
This trigger fires when the specified device/group is turned on.
-
Hub 2's touch buttons pressed
This trigger fires when one of the touch buttons of your Hub 2 is pressed. E.g. when the left touch button is pressed, turn on SwitchBot Color Bulb.
-
Device or group is turned off
This trigger fires when the specified device/group is turned off.
-
電源の変化
プラグミニの状態をアクション実行条件として設定できます
-
Unlock the lock
This trigger fires when user unlocking the lock, his password or fingerprint identification or card is confirmed.
-
水漏れセンサーの状態
水漏れセンサーの水漏れ/水位低下状態をトリガー条件として設定することが可能です。
-
Camera detects motion
This trigger fires when the specified camera detects motion. To use this trigger, camera’s motion detection should be turned on.
-
Power changes
You can choose Plug Mini's behaviour as a trigger condition
-
Camera detects sound
This trigger fires when the specified camera detects sound. To use this trigger, camera’s sound detection should be turned on.
-
Carbon dioxide changes
Whenever a preset carbon dioxide change detected, SwitchBot meter pro will try to trigger the service. E.g. if the carbon dioxide is too high, turn on SwitchBot air purifier.
-
Input incorrect password repetitiously
This trigger fires when someone input incorrect password repetitiously.
-
ロボット状態変更
このトリガーはロボットの状態が変更した時に実行します
-
Battery low
This trigger fires when residual electricity in the lock under threshold.
-
Water Detector State
You can use the Water Detector state as a condition to trigger an automation.
-
Door sensor is open
This trigger fires when the door sensor is open.
-
温度・湿度の変化
温度・湿度の変化を検出された時、SwitchBot温湿度計（メーター）が「THAT」サービスをトリガーにします。例えば、温度が27度より高い時、SwitchBot Hub PlusでエアコンをONにします。
-
Door sensor is closed
This trigger fires when the door sensor is closed.
-
Robot status changed
This trigger fires when the status of your SwitchBot Robot Vacuum Cleaner changed
-
Person is detected
This trigger fires when PIR detects person.
-
Temperature or humidity changes
Whenever a preset temperature and/or humidity change detected, SwitchBot Thermometer & Hygrometer (the Meter) will try to trigger the service. E.g. if the temperature is too high, turn on AC with the SwitchBot Hub Plus (the Hub Plus).
-
Leak detected
This trigger fires when water leak detected.
-
動体が検出された、または検出されない
動体検知の結果によって、SwitchBot人感センサーがサービスをトリガーします。
-
Sound and light detected
This trigger fires when water sound and light detected.
-
Motion detected or no motion detected
When Motion Sensor detected motion or no motion, the SwitchBot motion sensor will try to trigger the service.
-
Shake detected
This trigger fires when sensor shake detected
-
開閉と動体を検知する
開閉状態の検知結果によって、SwitchBot開閉センサーがサービスをトリガーします。
-
Contact and Motion Detection
When Contact Sensor detected door/window opened or closed or left open, the SwitchBot contact sensor will try to trigger the service.
-
ロック状態変更
このトリガーはロックの状態が変更した時に実行する
-
Lock status changed
This trigger fires when the status of your SwitchBot Lock is changed.
ハブ２のタッチボタンを押す
SwitchBotハブ２のタッチボタンを押すことをトリガー条件として設定することが可能です。例えば：ハブ２の左ボタンを押すと、SwitchBotスマート電球をオンにします。
Device or group is turned on
This trigger fires when the specified device/group is turned on.
Hub 2's touch buttons pressed
This trigger fires when one of the touch buttons of your Hub 2 is pressed. E.g. when the left touch button is pressed, turn on SwitchBot Color Bulb.
Device or group is turned off
This trigger fires when the specified device/group is turned off.
電源の変化
プラグミニの状態をアクション実行条件として設定できます
Unlock the lock
This trigger fires when user unlocking the lock, his password or fingerprint identification or card is confirmed.
水漏れセンサーの状態
水漏れセンサーの水漏れ/水位低下状態をトリガー条件として設定することが可能です。
Camera detects motion
This trigger fires when the specified camera detects motion. To use this trigger, camera’s motion detection should be turned on.
Power changes
You can choose Plug Mini's behaviour as a trigger condition
Camera detects sound
This trigger fires when the specified camera detects sound. To use this trigger, camera’s sound detection should be turned on.
Carbon dioxide changes
Whenever a preset carbon dioxide change detected, SwitchBot meter pro will try to trigger the service. E.g. if the carbon dioxide is too high, turn on SwitchBot air purifier.
Input incorrect password repetitiously
This trigger fires when someone input incorrect password repetitiously.
ロボット状態変更
このトリガーはロボットの状態が変更した時に実行します
Battery low
This trigger fires when residual electricity in the lock under threshold.
Water Detector State
You can use the Water Detector state as a condition to trigger an automation.
Door sensor is open
This trigger fires when the door sensor is open.
温度・湿度の変化
温度・湿度の変化を検出された時、SwitchBot温湿度計（メーター）が「THAT」サービスをトリガーにします。例えば、温度が27度より高い時、SwitchBot Hub PlusでエアコンをONにします。
Door sensor is closed
This trigger fires when the door sensor is closed.
Robot status changed
This trigger fires when the status of your SwitchBot Robot Vacuum Cleaner changed
Person is detected
This trigger fires when PIR detects person.
Temperature or humidity changes
Whenever a preset temperature and/or humidity change detected, SwitchBot Thermometer & Hygrometer (the Meter) will try to trigger the service. E.g. if the temperature is too high, turn on AC with the SwitchBot Hub Plus (the Hub Plus).
Leak detected
This trigger fires when water leak detected.
動体が検出された、または検出されない
動体検知の結果によって、SwitchBot人感センサーがサービスをトリガーします。
Sound and light detected
This trigger fires when water sound and light detected.
Motion detected or no motion detected
When Motion Sensor detected motion or no motion, the SwitchBot motion sensor will try to trigger the service.
Shake detected
This trigger fires when sensor shake detected
開閉と動体を検知する
開閉状態の検知結果によって、SwitchBot開閉センサーがサービスをトリガーします。
Contact and Motion Detection
When Contact Sensor detected door/window opened or closed or left open, the SwitchBot contact sensor will try to trigger the service.
ロック状態変更
このトリガーはロックの状態が変更した時に実行する
Lock status changed
This trigger fires when the status of your SwitchBot Lock is changed.
Queries (With)
-
History of Leak detected
This query returns a list of times when the sensor detected a water leak.
-
History of when Door sensor was closed
This query returns a list of times when the door sensor was closed.
-
History of when Door sensor was open
This query returns a list of times when the door sensor was open.
-
History of when a Person was detected
This query returns a list of when PIR detected person.
-
History of Device turned off
This query returns a list of times when the specified device/group was turned off.
-
History of Device was turned on
This query returns a list of when the specified device/group was turned on.
-
History of repetitious incorrect password alerts
This query returns a list of times when someone input an incorrect password repetitiously.
-
History of motion detections by Camera
This query returns a list of when a Camera detected motion. To use this query, Camera motion detected should be turned on.
-
History of Camera detected sound
This query returns a list of times when the specified camera detected sound. To use this query, camera’s sound detection must have been turned on.
-
History of Shake detected
This query returns a list of when sensor detected a shake
-
History of when lock unlocked
This query returns a list of when a user unloocked the lock and his password, fingerprint identification, or card was confirmed.
-
History of Sound or Light Detected
This query returns a list of when water sound or light were detected.
-
History of low Battery alerts
This query returns a list of when residual electricity in the lock dropped below the threshold. Note: this query will only return future events after this Applet is created.
History of Leak detected
This query returns a list of times when the sensor detected a water leak.
History of when Door sensor was closed
This query returns a list of times when the door sensor was closed.
History of when Door sensor was open
This query returns a list of times when the door sensor was open.
History of when a Person was detected
This query returns a list of when PIR detected person.
History of Device turned off
This query returns a list of times when the specified device/group was turned off.
History of Device was turned on
This query returns a list of when the specified device/group was turned on.
History of repetitious incorrect password alerts
This query returns a list of times when someone input an incorrect password repetitiously.
History of motion detections by Camera
This query returns a list of when a Camera detected motion. To use this query, Camera motion detected should be turned on.
History of Camera detected sound
This query returns a list of times when the specified camera detected sound. To use this query, camera’s sound detection must have been turned on.
History of Shake detected
This query returns a list of when sensor detected a shake
History of when lock unlocked
This query returns a list of when a user unloocked the lock and his password, fingerprint identification, or card was confirmed.
History of Sound or Light Detected
This query returns a list of when water sound or light were detected.
History of low Battery alerts
This query returns a list of when residual electricity in the lock dropped below the threshold. Note: this query will only return future events after this Applet is created.
Actions (Then that)
-
Bot turn off
This action will trigger the specified Bot to turn off the switch.
-
Turn on
This action will turn on the device/group of your choosing.
-
Bot press
This action will trigger the specified Bot to press the switch.
-
Turn off
This action will turn off the device/group of your choosing.
-
Bot turn on
This action will trigger the specified Bot to turn on the switch.
-
Activate Scene
This action will activate the specified scene.
-
Turn A/C off
This action will ask SwitchBot Hub Plus to turn off your paired air conditioner.
-
Set light brightness
This action will set your light to a specified brightness.
-
Turn A/C on
This action will ask SwitchBot Hub Plus to turn on or set your paired air conditioner with predefined mode, temperature and fan speed.
-
Set light color
This action will set the light to specified color.
-
Turn on appliance with Hub Plus IR remote
This action will ask SwitchBot Hub Plus to turn on your paired appliance with the IR remote feature.
-
Start Cool Mode
This action will set your AC to Cool Mode.
-
Turn off appliance with Hub Plus IR remote
This action will ask SwitchBot Hub Plus to turn off your paired appliance with the IR remote feature.
-
Start Heat Mode
This action will set your AC to Heat Mode.
-
Turn Plug on
This action will turn on your Plug.
-
Set AC temperature
This action will set your AC to a specified temperature by remote controller.
-
Turn Plug off
This action will turn off your Plug.
-
Turn on oscillation function of fan
This action will turn on the oscillation function of your fan by IR remote controller.
-
Control TV
This action will ask SwitchBot Hub Plus to send an infrared signal to control TV.
-
Turn off oscillation function of fan
This action will turn off the oscillation function of your fan by IR remote controller.
-
Control home appliances
This action will ask SwitchBot Hub Plus to send an infrared signal to control any "Others" types of appliances set in the SwitchBot App.
Note: Please use other actions if your appliance type is known to the App for a better experience
-
Fan 2 送風モード
4つの送風モードを切り替えます。
-
Control Fan
This Action will control the SwitchBot Smart Fan.
-
Fan 2 Blowing Mode
You can switch between 4 blowing modes.
-
Fan 2 Nightlight
You can set the nightlight status of your Air Circulator Fan.
-
Fan 2 常夜灯設定
常夜灯の明るさを調整できます。
-
Fan 2 Horizontal Oscillation
You can set the Horizontal Oscillation to turn on or turn off.
-
Fan 2 左右の首振り
首振りモードを設定できます。
-
Fan 2 Vertical Oscillation
You can set the Vertical Oscillation to turn on or turn off.
-
Fan 2 上下の首振り
上下の首振りモードを設定できます。
-
fan 2 Fan Speed
You can set the fan speed.
-
fan 2 風量
風量を調整できます。
-
扇風機をコントロール
このアクションはSwitchBotスマート扇風機を操作できます。
-
Control Humidifier
This Action will control the SwitchBot Smart Humidifier.
-
Control Evaporative Humidifier
This Action will control the SwitchBot Evaporative Humidifier.
-
気化式加湿器をコントロール
このアクションは、SwitchBotスマート気化式加湿器を制御します。
-
加湿器をコントロール
このアクションは、SwitchBotスマート加湿器を制御します。
-
Scene
Run the Scene you previously set in the SwitchBot App. Only manual execution types are allowed.
-
シーン
SwitchBot アプリで作成したシーンを実行します。（ご注意：手動実行するシーンのみ）
-
Control Curtain
This Action will control the SwitchBot Curtain.
-
カーテンをコントロール
このアクションは、SwitchBotカーテンを制御します。
-
Turn Bulb On/Off
You can set the on/off state of your Color Bulb here.
-
電球をオン/オフにする
本ページで電球の状態を設定できます
-
Bulb Brightness
You can set the brightness of your Color Bulb here.
-
電球の明るさ
本ページで電球の明るさを設定できます
-
Bulb Color
You can set the color of your Color Bulb here.
-
電球のカラー
本ページで電球のカラーを設定できます
-
Bulb Color Temperature
You can set the color temperature of your Color bulb here.
-
電球の色温度
本ページで電球のカラーを設定できます
-
Bulb Presets
You can set the presets saved in your SwitchBot app here.
-
電球のプリセット
本ページでSwitchBotアプリに保存されたプリセットを設定できます
-
Start vacuuming
The robot will start vacuuming
-
清掃する
ロボットは清掃を開始します
-
Pause vacuuming (Pause recharging)
The robot will pause vacuuming (pause recharging)
-
清掃/再充電を一時停止
ロボットは清掃/再充電を一時停止します
-
再充電する
ロボットは充電に帰還します
-
Start recharging
The robot will start recharging
-
Switch Mode
The robot will switch mode
-
モード切替
ロボットは吸引力のモードを切り替えます
-
Turn Ceiling Light On/Off
You can set your Ceiling Light to be turned on/off.
-
シーリングライトをオン/オフ
シーリングライトのオン/オフを設定できます
-
トグルシーリングライト（オン/オフ）
トグルシーリングライト（オン/オフ）
-
Toggle Ceiling Light On/Off
Toggle Ceiling Light On/Off
-
シーリングライトの色温度
シーリングライトの色温度を設定できます
-
Ceiling Light Color Temperature
You can set the color temperature of your Ceiling Light here.
-
Ceiling Light Brightness
You can set the brightness of your Ceiling Light here.
-
シーリングライトの明るさ
シーリングライトの明るさを設定できます
-
Open/close Blind Tilt
This action will open/close Blind Tilt up or down and to a specific percentage.
-
ブラインドポールの開閉を設定
ブラインドポールを特定の位置まで開ける/閉めるに設定可能です。
-
Control Air Purifier
This Action will control the SwitchBot Air Purifier.
-
Control RollerShade
This Action will control the SwitchBot RollerShade.
-
Change water output for mopping
Change water output for mopping
-
水拭きの水量を変更
水拭きの水量を変更
-
Start purity in situ
The platform will purity in situ
-
Start purity whole house
The platform will purity whole house
-
Start cruise whole house
The platform will cruise whole house
-
Back to base station
The platform will back to base station
-
原位置除染を開始する
原位置除染を開始する
-
家全体の浄化を始める
家全体の浄化を始める
-
ハウスツアーを開始する
ハウスツアーを開始する
-
基地局への復帰を開始する
基地局への復帰を開始する
-
LED Strip Light On/Off
You can set the on/off state of your Strip Light here.
-
テープライトをオン/オフにする
本ページでテープライトの状態を設定できます
-
LED Strip Light Color
You can set the color of Strip Light on this page.
-
テープライトのカラー
本ページでテープライトのカラーを設定できます
-
Power On/Off
You can set the Plug Mini's action
-
Toggle On/Off
You can set the Plug Mini's action
-
Delay On/Off
You can set the Plug Mini's action
-
電源オン/オフ
プラグミニの実行アクションを設定できます
-
トグル（オン/オフ）
プラグミニの実行アクションを設定できます
-
遅延実行（オン/オフ）
プラグミニの実行アクションを設定できます
Bot turn off
This action will trigger the specified Bot to turn off the switch.
Turn on
This action will turn on the device/group of your choosing.
Bot press
This action will trigger the specified Bot to press the switch.
Turn off
This action will turn off the device/group of your choosing.
Bot turn on
This action will trigger the specified Bot to turn on the switch.
Activate Scene
This action will activate the specified scene.
Turn A/C off
This action will ask SwitchBot Hub Plus to turn off your paired air conditioner.
Set light brightness
This action will set your light to a specified brightness.
Turn A/C on
This action will ask SwitchBot Hub Plus to turn on or set your paired air conditioner with predefined mode, temperature and fan speed.
Set light color
This action will set the light to specified color.
Turn on appliance with Hub Plus IR remote
This action will ask SwitchBot Hub Plus to turn on your paired appliance with the IR remote feature.
Start Cool Mode
This action will set your AC to Cool Mode.
Turn off appliance with Hub Plus IR remote
This action will ask SwitchBot Hub Plus to turn off your paired appliance with the IR remote feature.
Start Heat Mode
This action will set your AC to Heat Mode.
Turn Plug on
This action will turn on your Plug.
Set AC temperature
This action will set your AC to a specified temperature by remote controller.
Turn Plug off
This action will turn off your Plug.
Turn on oscillation function of fan
This action will turn on the oscillation function of your fan by IR remote controller.
Control TV
This action will ask SwitchBot Hub Plus to send an infrared signal to control TV.
Turn off oscillation function of fan
This action will turn off the oscillation function of your fan by IR remote controller.
Control home appliances
This action will ask SwitchBot Hub Plus to send an infrared signal to control any "Others" types of appliances set in the SwitchBot App.
Note: Please use other actions if your appliance type is known to the App for a better experience
Fan 2 送風モード
4つの送風モードを切り替えます。
Control Fan
This Action will control the SwitchBot Smart Fan.
Fan 2 Blowing Mode
You can switch between 4 blowing modes.
Fan 2 Nightlight
You can set the nightlight status of your Air Circulator Fan.
Fan 2 常夜灯設定
常夜灯の明るさを調整できます。
Fan 2 Horizontal Oscillation
You can set the Horizontal Oscillation to turn on or turn off.
Fan 2 左右の首振り
首振りモードを設定できます。
Fan 2 Vertical Oscillation
You can set the Vertical Oscillation to turn on or turn off.
Fan 2 上下の首振り
上下の首振りモードを設定できます。
fan 2 Fan Speed
You can set the fan speed.
fan 2 風量
風量を調整できます。
扇風機をコントロール
このアクションはSwitchBotスマート扇風機を操作できます。
Control Humidifier
This Action will control the SwitchBot Smart Humidifier.
Control Evaporative Humidifier
This Action will control the SwitchBot Evaporative Humidifier.
気化式加湿器をコントロール
このアクションは、SwitchBotスマート気化式加湿器を制御します。
加湿器をコントロール
このアクションは、SwitchBotスマート加湿器を制御します。
Scene
Run the Scene you previously set in the SwitchBot App. Only manual execution types are allowed.
シーン
SwitchBot アプリで作成したシーンを実行します。（ご注意：手動実行するシーンのみ）
Control Curtain
This Action will control the SwitchBot Curtain.
カーテンをコントロール
このアクションは、SwitchBotカーテンを制御します。
Turn Bulb On/Off
You can set the on/off state of your Color Bulb here.
電球をオン/オフにする
本ページで電球の状態を設定できます
Bulb Brightness
You can set the brightness of your Color Bulb here.
電球の明るさ
本ページで電球の明るさを設定できます
Bulb Color
You can set the color of your Color Bulb here.
電球のカラー
本ページで電球のカラーを設定できます
Bulb Color Temperature
You can set the color temperature of your Color bulb here.
電球の色温度
本ページで電球のカラーを設定できます
Bulb Presets
You can set the presets saved in your SwitchBot app here.
電球のプリセット
本ページでSwitchBotアプリに保存されたプリセットを設定できます
Start vacuuming
The robot will start vacuuming
清掃する
ロボットは清掃を開始します
Pause vacuuming (Pause recharging)
The robot will pause vacuuming (pause recharging)
清掃/再充電を一時停止
ロボットは清掃/再充電を一時停止します
再充電する
ロボットは充電に帰還します
Start recharging
The robot will start recharging
Switch Mode
The robot will switch mode
モード切替
ロボットは吸引力のモードを切り替えます
Turn Ceiling Light On/Off
You can set your Ceiling Light to be turned on/off.
シーリングライトをオン/オフ
シーリングライトのオン/オフを設定できます
トグルシーリングライト（オン/オフ）
トグルシーリングライト（オン/オフ）
Toggle Ceiling Light On/Off
Toggle Ceiling Light On/Off
シーリングライトの色温度
シーリングライトの色温度を設定できます
Ceiling Light Color Temperature
You can set the color temperature of your Ceiling Light here.
Ceiling Light Brightness
You can set the brightness of your Ceiling Light here.
シーリングライトの明るさ
シーリングライトの明るさを設定できます
Open/close Blind Tilt
This action will open/close Blind Tilt up or down and to a specific percentage.
ブラインドポールの開閉を設定
ブラインドポールを特定の位置まで開ける/閉めるに設定可能です。
Control Air Purifier
This Action will control the SwitchBot Air Purifier.
Control RollerShade
This Action will control the SwitchBot RollerShade.
Change water output for mopping
Change water output for mopping
水拭きの水量を変更
水拭きの水量を変更
Start purity in situ
The platform will purity in situ
Start purity whole house
The platform will purity whole house
Start cruise whole house
The platform will cruise whole house
Back to base station
The platform will back to base station
原位置除染を開始する
原位置除染を開始する
家全体の浄化を始める
家全体の浄化を始める
ハウスツアーを開始する
ハウスツアーを開始する
基地局への復帰を開始する
基地局への復帰を開始する
LED Strip Light On/Off
You can set the on/off state of your Strip Light here.
テープライトをオン/オフにする
本ページでテープライトの状態を設定できます
LED Strip Light Color
You can set the color of Strip Light on this page.
テープライトのカラー
本ページでテープライトのカラーを設定できます
Power On/Off
You can set the Plug Mini's action
Toggle On/Off
You can set the Plug Mini's action
Delay On/Off
You can set the Plug Mini's action
電源オン/オフ
プラグミニの実行アクションを設定できます
トグル（オン/オフ）
プラグミニの実行アクションを設定できます
遅延実行（オン/オフ）
プラグミニの実行アクションを設定できます
Smart Life and SwitchBot resources
How to automate anything
Yeah, we said it. Integration and automation is the name of our game here at IFTTT. With over 700 services, devices, and apps available, you have the ability to customize routines and create connections that didn’t exist before. From sma...
Best weather automations 2025
Integrate your favorite services and devices with weather updates to inform the temperature in your home using smart home technology or as your secret tool to keep your garden green.
Smart Holiday Homes Made Simple (and Automated)
The holidays are almost here, which you have probably noticed when you walk around your neighborhood or any shopping centre. This article is the ultimate guide to automating your holiday lights and decor, keeping your home welcoming and ...
How to automate your smart home
IFTTT makes your smart home work better together. Integration between smart devices in your home can be a complex process involving different subscriptions, hubs, and systems. Click to learn how to automate your home.
Applets for your morning routine
Ready to become a morning person? Creating automations can help start your day on the right track. We have rounded up a list of the best Applets to add into your morning routine.
Gift guide: For the new home owner 2024
Gifting your friends or family smart devices gives them the ability to customize their home to meet their lifestyle as well as opportunities to optimize their place for eco-efficiency. You may have a smart device or company that you have...
IFTTT helps all your apps and devices work better together