Time controlled on/off ewelink
Start today
Other popular eWeLink Smart Home workflows and automations
- Turn on/off Sonoff
- turn on off ewelink 2 Chanel light switch by location
- sonoff enter an area
- Turn on charger when phone battery is low
- Turn on or off your eWeLink 4 Channels Switch when you get close to home
- At sunrise, turn an eWeLink switch off
- When temperature is reached, send an IFTTT notification
- eWeLink VoIP call your device
Useful eWeLink Smart Home and UbiBot integrations
Triggers (If this)
- 4-Channel Plug turned on or offThis trigger fires when your eWeLink Support 4-Channel Plug is turned on or off.
- Temperature Rises above or Drops belowThis trigger monitors the UbiBot device's built-in temperature sensor readings and fires whenever the temperature rises above or drops below the value you provide.
- 3-Channel Plug turned on or offThis trigger fires when your eWeLink Support 3-Channel Plug is turned on or off.
- (Universal) Any Channel Field Value Rises above or Drops belowThis trigger monitors the UbiBot device's selected Field readings and fires whenever the reading rises above or drops below the value you provide.
- 2-Channel Plug turned on or offThis trigger fires when your eWeLink 2-Channel Plug is turned on or off.
- Humidity Rises above or Drops belowThis trigger monitors the UbiBot device's built-in humidity sensor readings and fires whenever the humidity rises above or drops below the value you provide.
- 1-Channel Plug turned on or offThis trigger fires when your eWeLink Support 1-Channel Plug is turned on or off.
- Light Rises above or Drops belowThis trigger monitors the UbiBot device's built-in light sensor readings and fires whenever the light level rises above or drops below the value in lux you provide.
- 4-Channel Switch turned on or offThis trigger fires when your eWeLink Support 4-Channel Switch is turned on or off.
- Voltage Rises above or Drops belowThis trigger monitors the voltage of the batteries or USB power and fires whenever the voltage rises above or drops below the value you provide.
- 3-Channel Switch turned on or offThis trigger fires when your eWeLink 3-Channel Switch is turned on or off.
- External Power Supply is Up or DownThis trigger monitors the status of the external power supply (USB) that connects to the device and fires whenever the power supply is up or down.
- 2-Channel Switch turned on or offThis trigger fires when your eWeLink Support 2-Channel Switch is turned on or off.
- Device is offlineThis trigger fires when your UbiBot device is offline.
- 1-Channel Switch turned on or offThis trigger fires when your eWeLink Support 1-Channel Switch is turned on or off.
- Motion is Detected or Undetected from Motion SensorThis trigger monitors the status of the motion sensor and fires whenever motion is detected or undetected.
- Smart Dimmer turned on or offThis trigger fires when your eWeLink Support Smart Dimmer is turned on or off.
- External-DS18B20-Temperature-Probe-1 Rises above or Drops belowThis trigger monitors the UbiBot device's external DS18B20 temperature probe 1's readings and fires whenever the temperature rises above or drops below the value you provide (Available for WS1 and WS1-PRO devices).
- Brightness is aboveThis trigger fires when the brightness of selected dimmer is above threshold.
- External-DS18B20-Temperature-Probe-2 Rises above or Drops belowThis trigger monitors the UbiBot device's external DS18B20 temperature probe 2's readings and fires whenever the temperature rises above or drops below the value you provide. (Available for WS1-PRO devices)
- Brightness is belowThis trigger fires when the brightness of selected dimmer is below threshold.
- External-TH30S-Probe-Temperature Rises above or Drops belowThis trigger monitors the UbiBot device's external TH30S probe Temperature readings and fires whenever the Temperature rises above or drops below the value you provide (Available for WS1-PRO and GS1 devices).
- Door sensor is open or closedThis trigger fires when the state of selected door sensor is open or closed.
- External-TH30S-Probe-Humidity Rises above or Drops belowThis trigger monitors the UbiBot device's external TH30S probe Humidity readings and fires whenever the Humidity rises above or drops below the value you provide (Available for WS1-PRO and GS1 devices).
- Temperature goes above or belowThis trigger fires when the temperature of selected device goes above or below threshold.
- External-Soil-Probe-Moisture Rises above or Drops belowThis trigger monitors the UbiBot device's external Soil Probe Moisture readings and fires whenever the moisture level rises above or drops below the value you provide.
- Humidity goes above or belowThis trigger fires when the humidity of selected device goes above or below threshold.
- External-Soil-Probe-Temperature Rises above or Drops belowThis trigger monitors the UbiBot device's external Soil Probe Moisture readings and fires whenever the temperature level rises above or drops below the value you provide.
- Voltage goes above or belowThis trigger fires when the voltage of selected device is above or below threshold.
- External-PT100-Probe Temperature Rises above or Drops belowThis trigger monitors the UbiBot device's external PT100 probe Temperature readings and fires whenever the Temperature rises above or drops below the value you provide.
- Electric current goes above or belowThis trigger fires when the electric current of the selected device goes above or below threshold.
- Vibration Index Rises above or Drops belowThis trigger monitors the WS1 vibration sensor readings and fires whenever the vibration index rises above or drops below the value you provide.
- Light turned on or offThis trigger fires when your light is turned on or off.
- Carbon Dioxide (CO2) Rises above or Drops belowThis trigger monitors the UbiBot device's connected Carbon Dioxide (CO2) probe readings and fires whenever the result rises above or drops below the value you provide.
- Light brightness goes above or belowThis trigger fires when your light brightness goes above or below.
- FanLight turned on or offThis trigger fires when the fan or the light of your FanLight is turned on or off
- RF Bridge Alarm activatedThis trigger fires when an alarm of your RF Bridge is activated.
- When Camera detects a motion eventThis Trigger fires every time the camera detects a motion event.
- Low Water Level of DiffuserThis trigger fires when the water level of a diffuser is low.
- Zigbee Motion SensorThis trigger fires when motion is detected or no motion is detected from Zigbee motion sensor.
- Leak detectedThis trigger fires when leak is detected from water leak sensor.
- Zigbee door sensor is open or closedThis trigger fires when the status of a Zigbee door sensor is open or closed.
- Zigbee Wireless Switch PressedThis trigger fires when Zigbee Wireless Switch is pressed, double pressed, or long pressed.
- Electric curtain is open or closedThis trigger fires when the selected electric curtain is open or closed.
- Enabled/disabled Child Lock of ThermostatThis trigger fires when the child lock status changes (enabled/disabled).
- Thermostat Mode changesThis trigger fires when the thermostat mode changes.
- Thermostat turned on or offThis trigger fires when the thermostat turns on or off
- Color temperature(CT) of light appearances warm or coolThis trigger fires when your light’s color temperature of light apperances warm or cool white.
- Light turns to a specified colourThis trigger fires when your lights to a specified colour .
- Scene Controller pressedThis Trigger fires every time your eWeLink Scene Controller is pressed.
- Button PressedThis Trigger fires every time your eWeLink Button is pressed.
- Device/Group is turned on or offThis Trigger fires when the device/group is turn on or off
Queries (With)
- History of vibration index rises above or drops below thresholdThis query monitors the WS1 vibration sensor readings and returns a list of whenever the vibration index rises above or drops below the value you provide. Note: this query will only return future events after this Applet is created.
- Current power stateThis query returns the on/off state of the device you choose.
- History of light crossed a thresholdThis query monitors the UbiBot device's built-in light sensor readings and returns a list of whenever the light level rose above or dropped below the value in lux you provide. Note: this query will only return future events after this Applet is created.
- History of External-Soil-Probe-Moisture Rises above or drops belowThis query returns a list of when the UbiBot device's external Soil Probe Moisture level rises above or drops below the value you provide. Note: this query will only return future events after this Applet is created.
- History of Sensor Data ReceivedThis query returns a list of when your UbiBot receives new sensor data. The raw data can be exported to other services, such as Google Spreadsheet.
Actions (Then that)
- Turn 4-Channel Plug on or offThis action will turn your eWeLink Support 4-Channel Plug on or off.
- (Universal) Send Command to Any ChannelSend Action Command to Any Target Channel
- Turn 3-Channel Plug on or offThis action will turn your eWeLink Support 3-Channel Plug on or off.
- (Universal) Send RAW Command to Any ChannelSend Action RAW Command to Any Target Channel
- Turn 2-Channel Plug on or offThis action will turn your eWeLink 2-Channel Plug on or off.
- Turn On or Off your UbiBot Smart PlugSend Action Command to Turn On or Off your UbiBot Smart Plug
- Turn 1-Channel Plug on or offThis action will turn your eWeLink Support 1-Channel Plug on or off.
- Turn On or Off your Network Relay SwitchSend Action Command to Turn On or Off your UbiBot Network Relay Switch
- Turn 4-Channel Switch on or offThis action will turn your eWeLink 4-Channel Switch on or off.
- Turn 3-Channel Switch on or offThis action will turn your eWeLink Support 3-Channel Switch on or off.
- Turn 2-Channel Switch on or offThis action will turn your eWeLink Support 2-Channel Switch on or off.
- Turn 1-Channel Switch on or offThis action will turn your eWeLink Support 1-Channel Switch on or off.
- Turn Smart Dimmer on or offThis action will turn your eWeLink Support smart dimmer on or off.
- Set brightness for Smart DimmerThis action will set brightness for selected eWeLink Support smart dimmer .
- Set color for lightThis action will set a color for selected light.
- Set color temperature for lightThis action will set a color temperature for selected light.
- Set brightness for lightThis action will set the brightness for selected light .
- Turn on or off lightThis action will turn your light on or off.
- Press Remote Button on RF BridgeThis action will press selected remote button on your RF Bridge.
- Control FanLightThis action will turn on or turn off the fan or the light of your fanlight.
- Open or close electric curtainThis action will open or close your electric curtain.
- Turn on or turn off diffuserThis action will turn your diffuser on or off.
- Set percentage of electric curtainThis action will open selected curtain to the percentage you set.
- Enable/disable the Child Lock of ThermostatThis action will enable or disable the child lock.
- Change Thermostat ModeThis action will change the thermostat mode (Manual/Program).
- Turn on or off ThermostatThis action will turn your eWeLink Thermostat on or off.
- Fanlight on-off and speed settingThis action will set the light on/off or the fan speed of fanlight.
- Camera makes alarmThis Action will makes the camera sound an alarm.
- Set temperatureThis action will set to a target temperature
- Turn on or off device/groupThis action will turn your device/group turn on or off
IFTTT helps all your apps and devices work better together