Connect eWeLink Smart Home to Weather Underground and unlock powerful automations

This trigger fires when your eWeLink Support 4-Channel Plug is turned on or off.

This Trigger retrieves today's current weather report within 5 minutes of the time you specify. NOTE: Pollen count available only in the USA.

This trigger fires when your eWeLink Support 3-Channel Plug is turned on or off.

This Trigger retrieves tomorrow's weather report within 5 minutes of the time you specify, depending on when forecast data is updated.

This trigger fires when your eWeLink 2-Channel Plug is turned on or off.

This Trigger monitors your local temperature and fires whenever the temperature drops below the value you provide.

This trigger fires when your eWeLink Support 1-Channel Plug is turned on or off.

This Trigger monitors your local temperature and fires whenever the temperature rises above the value you provide.

This trigger fires when your eWeLink Support 4-Channel Switch is turned on or off.

This Trigger monitors changes in the current weather condition. When one of those conditions is met the Trigger fires. Currently only these simple conditions are supported: Rain, Snow, Cloudy, Clear.

This trigger fires when your eWeLink 3-Channel Switch is turned on or off.

This Trigger fires every time tomorrow’s forecasted low temperature drops below a value you provide.

This trigger fires when your eWeLink Support 2-Channel Switch is turned on or off.

This Trigger fires every time tomorrow’s forecasted high temperature rises above a value you provide.

This trigger fires when your eWeLink Support 1-Channel Switch is turned on or off.

This Trigger monitors changes in tomorrow’s forecasted weather condition.

This trigger fires when your eWeLink Support Smart Dimmer is turned on or off.

This Trigger fires within 15 minutes of the sunrise in your location.

This trigger fires when the brightness of selected dimmer is above threshold.

This Trigger fires within 15 minutes of the sunset in your location.

This trigger fires when the brightness of selected dimmer is below threshold.

This Trigger fires every time the wind speed rises above a value you specify in your location.

This trigger fires when the state of selected door sensor is open or closed.

This Trigger monitors your local pollen levels and fires every time the pollen count rises above the value you specify (1-12). NOTE: Available only in the USA.

This trigger fires when the temperature of selected device goes above or below threshold.

This Trigger monitors your local humidity and fires every time the humidity rises above the value you specify.

This trigger fires when the humidity of selected device goes above or below threshold.

This Trigger monitors your local UV levels and fires every time the UV index rises above the value you specify (0-16).

This trigger fires when the voltage of selected device is above or below threshold.

This trigger fires when the electric current of the selected device goes above or below threshold.

This trigger fires when your light is turned on or off.

This trigger fires when your light brightness goes above or below.

This trigger fires when the fan or the light of your FanLight is turned on or off

This trigger fires when an alarm of your RF Bridge is activated.

This Trigger fires every time the camera detects a motion event.

This trigger fires when the water level of a diffuser is low.

This trigger fires when motion is detected or no motion is detected from Zigbee motion sensor.

This trigger fires when leak is detected from water leak sensor.

This trigger fires when the status of a Zigbee door sensor is open or closed.

This trigger fires when Zigbee Wireless Switch is pressed, double pressed, or long pressed.

This trigger fires when the selected electric curtain is open or closed.

This trigger fires when the child lock status changes (enabled/disabled).

This trigger fires when the thermostat mode changes.

This trigger fires when the thermostat turns on or off

This trigger fires when your light’s color temperature of light apperances warm or cool white.

This trigger fires when your lights to a specified colour .

This Trigger fires every time your eWeLink Scene Controller is pressed.

This Trigger fires every time your eWeLink Button is pressed.

This Trigger fires when the device/group is turn on or off

This trigger fires when the AQIs of selected devicegoes above or below threshold

Get the current weather

This query returns the on/off state of the device you choose.

Two day forecast

This query monitors your local humidity and returns a list of times when the humidity rose above the value you specified. Note: this query will only return future events after this Applet is created.

This query returns a list of times when the wind speed rose above a value you specify in your location. Note: this query will only return future events after this Applet is created.

This query monitors your local pollen levels and returns a list of times when the pollen count rose above the value you specified (1-12). NOTE: Available only in the USA. Note: this query will only return future events after this Applet is created.

This query returns a list of times when tomorrows forecasted high temperature rose above a value you provided. Note: this query will only return future events after this Applet is created.

This query returns a list of alerts when tomorrows forecasted low temperature dropped below a value you provided. Note: this query will only return future events after this Applet is created.

This query monitors your local temperature and returns a list of times when the temperature rose above the value you provided. Note: this query will only return future events after this Applet is created.

This query monitors your local temperature and returns a list of times when the temperature dropped below the value you provide. Note: this query will only return future events after this Applet is created.

This query monitors your local UV levels and returns a list of times when the UV index rose above the value you specified (0-16). Note: this query will only return future events after this Applet is created.

This query returns a history of sunrises in your location. Note: this query will only return future events after this Applet is created.

This query returns a history of sunsets at your location.

This query returns a list of times when the observed weather changed to meet a specific condition (Rain, Snow, Cloudy, or Clear).

This query returns a list of times when the forecasted weather changed to meet a specific condition (Rain, Snow, Cloudy, or Clear).

This action will turn your eWeLink Support 4-Channel Plug on or off.

This action will turn your eWeLink Support 3-Channel Plug on or off.

This action will turn your eWeLink 2-Channel Plug on or off.

This action will turn your eWeLink Support 1-Channel Plug on or off.

This action will turn your eWeLink 4-Channel Switch on or off.

This action will turn your eWeLink Support 3-Channel Switch on or off.

This action will turn your eWeLink Support 2-Channel Switch on or off.

This action will turn your eWeLink Support 1-Channel Switch on or off.

This action will turn your eWeLink Support smart dimmer on or off.

This action will set brightness for selected eWeLink Support smart dimmer .

This action will set a color for selected light.

This action will set a color temperature for selected light.

This action will set the brightness for selected light .

This action will turn your light on or off.

This action will press selected remote button on your RF Bridge.

This action will turn on or turn off the fan or the light of your fanlight.

This action will open or close your electric curtain.

This action will turn your diffuser on or off.

This action will open selected curtain to the percentage you set.

This action will enable or disable the child lock.

This action will change the thermostat mode (Manual/Program).

This action will turn your eWeLink Thermostat on or off.

This action will set the light on/off or the fan speed of fanlight.

This Action will makes the camera sound an alarm.

This action will set to a target temperature

This action will turn your device/group turn on or off

This will cause the camera to perform the action you selected.

This action will set the device to sound an alarm or beep.

This action will set to a security mode or disarm.