Auto-Run Dehumidifier When Motion Is Detected
Other popular Aqara Home for US workflows and automations
-
-
-
Send SMS on Motion Capturing on your Aqara camera
-
-
When TP-Link Tapo Cam detects a line crossing motion, my Garage Lights Switch ON
1
-
-
Press SkyBell Doorbell When Detecting Motion on Another Device
-
-
If Aqara FP2 detects motion, then Set light level
1
-
-
When humidity reaches a certain %, turn on the dehumidifier
-
-
When humidity drops to a certain %, turn off the dehumidifier
-
-
Connection to turn Aqara plug on
-
-
Get a notification when the door was opened
36
-
Build your own Aqara Home for US and HAVEN IAQ automations
Triggers (If this)
-
Wall Switch was turned on/off (for Single Rocker / Channel switch or module)
This trigger fires when the specified single rocker switch is turned on/off.
-
PM2.5 threshold is crossed
This Trigger fires whenever the measured Particulate Matter of 2.5 microns in size (PM2.5) is above or below the threshold.
-
Wall Switch was turned on/off (for Double Rocker / Channel switch or module)
This trigger fires when the specified double rocker switch is turned on/off.
-
Relative Humidity threshold is crossed
This Trigger fires whenever the measured Relative Humidity (RH) is above or below the threshold.
-
Wall Switch was turned on/off (for Triple Rocker / Channel switch or module)
This trigger fires when the specified triple rocker switch is turned on/off.
-
Temperature threshold is crossed
This Trigger fires whenever the measured temperature is above or below the threshold.
-
Relay Controller was turned on/off (for 2 Channels )
This trigger fires when the specified Relay Controller is turned on/off.
-
VOC threshold is crossed
This Trigger fires whenever the measured Volatile Organic Compounds (VOCs) is above or below the threshold.
-
Hub light / bulb was turned on/off
This trigger fires when the specified light is turned on/off.
-
Plug was turned on/off
This trigger fires when the specified plug is turned on/off.
-
Click (for Wireless Single Rocker / Mini switch)
This trigger fires when the specified single rocker switch is single clicked/double clicked/long pressed.
-
Click (for Wireless Double Rocker switches)
This trigger fires when the specified double rocker switch is single clicked/double clicked/long pressed.
-
Temperature reaches up to
This trigger fires when the temperature reaches the specified value.
-
Temperature drops to
This trigger fires when the temperature drops to the specified value.
-
Humidity reaches up to
This trigger fires when the humidity reaches the specified value.
-
Humidity drops to
This trigger fires when the humidity drops to the specified value.
-
TVOC reaches up to
This trigger fires when the tvoc reaches the specified value.
-
TVOC drops to
This trigger fires when the tvoc drops to the specified value.
-
Darkness is detected
This trigger fires when the darkness is detected.
-
Camera detects sound
This trigger fires when the specified camera detects sounds. To use this trigger, camera's sound detection should be turned on.
-
Camera detects motion
This trigger fires when the specified camera detects motion. To use this trigger, camera's motion detection should be turned on.
-
Motion is detected
This trigger fires when motion is detected.
-
Leak is detected
This trigger fires when water leak is detected.
-
Water recedes
This trigger fires when the water recedes.
-
Door and window sensor is open
This trigger fires when the door and window sensor is open.
-
Door and window sensor is closed
This trigger fires when the door and window sensor is closed.
-
Motion is detected and brightness is below
This trigger fires when the motion is detected and brightness is below the specified value.
-
Motion is detected and brightness is above
This trigger fires when the motion is detected and brightness is above the specified value.
-
Cube was triggered after one-minute inactivity
This trigger fires when the cube is triggered after one-minute inactivity.
-
Cube was flipped
This trigger fires when the the cube was flipped
-
Cube was pushed
This trigger fires when the cube was pushed.
-
Cube was rotated
This trigger fires when the cube was rotated.
-
Cube was tapped twice
This trigger fires when the cube was tapped twice.
-
Cube was shaken
This trigger fires when the cube was shaken.
-
Drop is detected
This trigger fires when the drop is detected.
-
Tilt is detected
This trigger fires when the tilt is detected.
-
Vibration is detected
This trigger fires when the vibration is detected.
-
Curtain is fully opened/closed
This trigger fires when the specified curtain is fully opened/closed.
-
Single press the switch (for Single Rocker switches)
This trigger fires when single press the specified switch.
-
Single press the switch (for Double Rocker switches)
This trigger fires when single press the specified switch.
-
Low battery
The battery of the device is low
-
Bell ringing was detected
This trigger fires when When Bell ringing is detected
-
Forcible demolition alarm detected
This trigger fires when Forcible demolition alarm detected
-
Recognize the specified face
This trigger fires when recognize the specified face
-
Recognize strange faces
This trigger fires when recognize strange faces
-
Somebody linger
This trigger fires when somebody is lingering at your doorstep
-
Cube flip to side 1
This trigger fires when the cube flip to side 1
-
Cube flip to side 2
This trigger fires when the cube flip to side 2
-
Cube flip to side 3
This trigger fires when the cube flip to side 3
-
Cube flip to side 4
This trigger fires when the cube flip to side 4
-
Cube flip to side 5
This trigger fires when the cube flip to side 5
-
Cube flip to side 6
This trigger fires when the cube flip to side 6
-
Zone detection
This trigger fires when an event is detected in the zone
-
Recognize the specified vehicle
This trigger fires when the camera recognize the specified vehicle
-
Click (Wireless switch for S1E)
This trigger fires when the S1E switch is clicked.
-
Presence is detected
This trigger fires when presence detected.
-
Absence is detected
This trigger fires when absence detected.
-
Pet detected
This trigger fires when when the camera detects pet.
-
Package detected
This trigger fires when when the camera detects package.
-
Unknown vehicle detected
This trigger fires when the camera detects detects unknown vehicle.
-
Human detected
This trigger fires when when the camera detects human.
Wall Switch was turned on/off (for Single Rocker / Channel switch or module)
This trigger fires when the specified single rocker switch is turned on/off.
PM2.5 threshold is crossed
This Trigger fires whenever the measured Particulate Matter of 2.5 microns in size (PM2.5) is above or below the threshold.
Wall Switch was turned on/off (for Double Rocker / Channel switch or module)
This trigger fires when the specified double rocker switch is turned on/off.
Relative Humidity threshold is crossed
This Trigger fires whenever the measured Relative Humidity (RH) is above or below the threshold.
Wall Switch was turned on/off (for Triple Rocker / Channel switch or module)
This trigger fires when the specified triple rocker switch is turned on/off.
Temperature threshold is crossed
This Trigger fires whenever the measured temperature is above or below the threshold.
Relay Controller was turned on/off (for 2 Channels )
This trigger fires when the specified Relay Controller is turned on/off.
VOC threshold is crossed
This Trigger fires whenever the measured Volatile Organic Compounds (VOCs) is above or below the threshold.
Hub light / bulb was turned on/off
This trigger fires when the specified light is turned on/off.
Plug was turned on/off
This trigger fires when the specified plug is turned on/off.
Click (for Wireless Single Rocker / Mini switch)
This trigger fires when the specified single rocker switch is single clicked/double clicked/long pressed.
Click (for Wireless Double Rocker switches)
This trigger fires when the specified double rocker switch is single clicked/double clicked/long pressed.
Temperature reaches up to
This trigger fires when the temperature reaches the specified value.
Temperature drops to
This trigger fires when the temperature drops to the specified value.
Humidity reaches up to
This trigger fires when the humidity reaches the specified value.
Humidity drops to
This trigger fires when the humidity drops to the specified value.
TVOC reaches up to
This trigger fires when the tvoc reaches the specified value.
TVOC drops to
This trigger fires when the tvoc drops to the specified value.
Darkness is detected
This trigger fires when the darkness is detected.
Camera detects sound
This trigger fires when the specified camera detects sounds. To use this trigger, camera's sound detection should be turned on.
Camera detects motion
This trigger fires when the specified camera detects motion. To use this trigger, camera's motion detection should be turned on.
Motion is detected
This trigger fires when motion is detected.
Leak is detected
This trigger fires when water leak is detected.
Water recedes
This trigger fires when the water recedes.
Door and window sensor is open
This trigger fires when the door and window sensor is open.
Door and window sensor is closed
This trigger fires when the door and window sensor is closed.
Motion is detected and brightness is below
This trigger fires when the motion is detected and brightness is below the specified value.
Motion is detected and brightness is above
This trigger fires when the motion is detected and brightness is above the specified value.
Cube was triggered after one-minute inactivity
This trigger fires when the cube is triggered after one-minute inactivity.
Cube was flipped
This trigger fires when the the cube was flipped
Cube was pushed
This trigger fires when the cube was pushed.
Cube was rotated
This trigger fires when the cube was rotated.
Cube was tapped twice
This trigger fires when the cube was tapped twice.
Cube was shaken
This trigger fires when the cube was shaken.
Drop is detected
This trigger fires when the drop is detected.
Tilt is detected
This trigger fires when the tilt is detected.
Vibration is detected
This trigger fires when the vibration is detected.
Curtain is fully opened/closed
This trigger fires when the specified curtain is fully opened/closed.
Single press the switch (for Single Rocker switches)
This trigger fires when single press the specified switch.
Single press the switch (for Double Rocker switches)
This trigger fires when single press the specified switch.
Low battery
The battery of the device is low
Bell ringing was detected
This trigger fires when When Bell ringing is detected
Forcible demolition alarm detected
This trigger fires when Forcible demolition alarm detected
Recognize the specified face
This trigger fires when recognize the specified face
Recognize strange faces
This trigger fires when recognize strange faces
Somebody linger
This trigger fires when somebody is lingering at your doorstep
Cube flip to side 1
This trigger fires when the cube flip to side 1
Cube flip to side 2
This trigger fires when the cube flip to side 2
Cube flip to side 3
This trigger fires when the cube flip to side 3
Cube flip to side 4
This trigger fires when the cube flip to side 4
Cube flip to side 5
This trigger fires when the cube flip to side 5
Cube flip to side 6
This trigger fires when the cube flip to side 6
Zone detection
This trigger fires when an event is detected in the zone
Recognize the specified vehicle
This trigger fires when the camera recognize the specified vehicle
Click (Wireless switch for S1E)
This trigger fires when the S1E switch is clicked.
Presence is detected
This trigger fires when presence detected.
Absence is detected
This trigger fires when absence detected.
Pet detected
This trigger fires when when the camera detects pet.
Package detected
This trigger fires when when the camera detects package.
Unknown vehicle detected
This trigger fires when the camera detects detects unknown vehicle.
Human detected
This trigger fires when when the camera detects human.
Queries (With)
Actions (Then that)
-
Wake up camera
This action will wake up the specified camera.
-
Sleep camera
This action will sleep the specified camera.
-
Wake up / sleep camera
This action will wake up / sleep of the specified camera.
-
Enable motion detection
This action will enable motion detection of the specified camera.
-
Enable sound detection
This action will enable sound detection of the specified camera.
-
Disable motion detection
This action will disable motion detection of the specified camera.
-
Disable sound detection
This action will disable sound detection of the specified camera.
-
Enable / Disable motion detection
This action will enable / disable motion detection of the specified camera.
-
Enable / Disable sound detection
This action will enable / disable sound detection of the specified camera.
-
Turns on/off plug
This action will turn on/off the plug of your choosing.
-
Turn on/off switch (for Single Rocker switches)
This action will turn on/off the single rocker switches of your choosing.
-
Turn on/off switch (for Double Rocker switches)
This action will turn on/off the double rocker switches of your choosing.
-
Turn on/off switch (for Triple Rocker switches)
This action will turn on/off the triple rocker switches of your choosing.
-
Turn on/off Wireless Relay Controller (for 2 Channels)
This action will turn on/off the wireless relay controller of your choosing.
-
Turns on/off the light
This action will turn on/off the light of your choosing.
-
Open the curtain
This action will open the curtain of your choosing.
-
Close the curtain
This action will close the curtain of your choosing.
-
Open/close the curtain
This action will open/close the curtain of your choosing.
-
Stop the curtain
This action will stop the curtain of your choosing.
-
Open the curtain to the designated position
This action will open the curtain of your choosing to the designated position.
-
Feeding for once
This action will make feeder feed once
-
Set brightness
This action will Set the light of brightness
-
Set color temperature
This action will set the color temperature of lamp
-
Set color
This action will set the color of the light
-
Turn on/off the lamp (for 2 Channels)
This action will Turn on/off the light of your choosing.
-
Run light scenario
This action will run the light scenario
Wake up camera
This action will wake up the specified camera.
Sleep camera
This action will sleep the specified camera.
Wake up / sleep camera
This action will wake up / sleep of the specified camera.
Enable motion detection
This action will enable motion detection of the specified camera.
Enable sound detection
This action will enable sound detection of the specified camera.
Disable motion detection
This action will disable motion detection of the specified camera.
Disable sound detection
This action will disable sound detection of the specified camera.
Enable / Disable motion detection
This action will enable / disable motion detection of the specified camera.
Enable / Disable sound detection
This action will enable / disable sound detection of the specified camera.
Turns on/off plug
This action will turn on/off the plug of your choosing.
Turn on/off switch (for Single Rocker switches)
This action will turn on/off the single rocker switches of your choosing.
Turn on/off switch (for Double Rocker switches)
This action will turn on/off the double rocker switches of your choosing.
Turn on/off switch (for Triple Rocker switches)
This action will turn on/off the triple rocker switches of your choosing.
Turn on/off Wireless Relay Controller (for 2 Channels)
This action will turn on/off the wireless relay controller of your choosing.
Turns on/off the light
This action will turn on/off the light of your choosing.
Open the curtain
This action will open the curtain of your choosing.
Close the curtain
This action will close the curtain of your choosing.
Open/close the curtain
This action will open/close the curtain of your choosing.
Stop the curtain
This action will stop the curtain of your choosing.
Open the curtain to the designated position
This action will open the curtain of your choosing to the designated position.
Feeding for once
This action will make feeder feed once
Set brightness
This action will Set the light of brightness
Set color temperature
This action will set the color temperature of lamp
Set color
This action will set the color of the light
Turn on/off the lamp (for 2 Channels)
This action will Turn on/off the light of your choosing.
Run light scenario
This action will run the light scenario
How to connect Aqara Home for US and HAVEN IAQ
Find or create an Applet
Start by discovering an automation to connect or customizing your own. It's quick and easy.Connect IFTTT to your accounts
Securely connect your Aqara Home for US and HAVEN IAQ accounts.Finalize and customize your Applet
Review your trigger and action settings. Your Applet is ready to go!
IFTTT helps all your apps and devices work better together