When PM2.5 levels become unhealthy, set Lennox iComfort fan to On
Start today
Other popular HAVEN IAQ workflows and automations
-
- Set My Thermostat Fan to Run Once When Haven IAQ VOC Level Reaches an Unhealthy Reading
- Run My Thermostat Schedule When Haven IAQ VOC Level is Back to a Healthy Reading
- When PM2.5 readings return to healthy levels, turn off Levoit Air Purifier
- When Relative Humidity readings return to acceptable levels, turn off Kasa Switch or Plug
- When PM2.5 readings return to healthy levels, set Lennox iComfort fan to Auto
- When PM2.5 levels become unhealthy, toggle a Kasa Switch or Plug & create a Google Calendar event
- When VOC levels become unhealthy, toggle a Kasa Switch or Plug & create a Google Calendar event
- Set my thermostat fan to continuous for 30 min when HAVEN detects unhealthy PM2.5 levels
Useful HAVEN IAQ and TrickleStar Connected Products integrations
Triggers (If this)
- Thermostat mode or setpoint changesThis trigger fires when TrickleStar Thermostat system mode or setpoint changes.
- PM2.5 threshold is crossedThis Trigger fires whenever the measured Particulate Matter of 2.5 microns in size (PM2.5) is above or below the threshold.
- Thermostat occupancy changesThis trigger fires when TrickleStar Thermostat occupancy changes.
- Relative Humidity threshold is crossedThis Trigger fires whenever the measured Relative Humidity (RH) is above or below the threshold.
- Thermostat room temperature is greater thanThis trigger fires every time your TrickleStar thermostat senses that the room temperature rises above the value you specified.
- Temperature threshold is crossedThis Trigger fires whenever the measured temperature is above or below the threshold.
- Thermostat room temperature is less thanThis trigger fires every time your TrickleStar thermostat senses that the room temperature drops below the value you specified.
- VOC threshold is crossedThis Trigger fires whenever the measured Volatile Organic Compounds (VOCs) is above or below the threshold.
- WHC detects a leakThis trigger fires when TrickleStar Water Heater Controller detects a leak.
Queries (With)
Actions (Then that)
- Turn device onThis action turns on your TrickleStar Connected Product.
- Turn device offThis action turns off your TrickleStar Connected Product.
- Set thermostat temporary holdThis action will set temporary hold on your TrickleStar thermostat using the specified system mode and setpoint. The temporary hold will last until the next schedule event.
- Resume thermostat scheduleThis action will resume schedule on your TrickleStar thermostat.
- Set thermostat fan onThis action sets the HVAC fan on on your TrickleStar Thermostat.
- Set thermostat fan to autoThis action sets the HVAC fan to Auto on your TrickleStar Thermostat. The Auto fan state means the fan will turn on when the HVAC system is on, and the fan will turn off when the HVAC system is off.
- Set thermostat fan to run onceThis action turns on the HVAC fan for one run cycle, with a configurable fan run duration.
- Schedule vacation eventThis action will schedule a vacation event on all devices of the selected site. It can be used with triggers like Google Calendar "Any event starts".
IFTTT helps all your apps and devices work better together