Connect Aqara Home for US to Philips Hue and unlock powerful automations

This trigger fires when the specified single rocker switch is turned on/off.

This trigger fires when the specified double rocker switch is turned on/off.

This trigger fires when the specified triple rocker switch is turned on/off.

This trigger fires when the specified Relay Controller is turned on/off.

This trigger fires when the specified light is turned on/off.

This trigger fires when the specified plug is turned on/off.

This trigger fires when the specified single rocker switch is single clicked/double clicked/long pressed.

This trigger fires when the specified double rocker switch is single clicked/double clicked/long pressed.

This trigger fires when the temperature reaches the specified value.

This trigger fires when the temperature drops to the specified value.

This trigger fires when the humidity reaches the specified value.

This trigger fires when the humidity drops to the specified value.

This trigger fires when the tvoc reaches the specified value.

This trigger fires when the tvoc drops to the specified value.

This trigger fires when the darkness is detected.

This trigger fires when the specified camera detects sounds. To use this trigger, camera's sound detection should be turned on.

This trigger fires when the specified camera detects motion. To use this trigger, camera's motion detection should be turned on.

This trigger fires when motion is detected.

This trigger fires when water leak is detected.

This trigger fires when the water recedes.

This trigger fires when the door and window sensor is open.

This trigger fires when the door and window sensor is closed.

This trigger fires when the motion is detected and brightness is below the specified value.

This trigger fires when the motion is detected and brightness is above the specified value.

This trigger fires when the cube is triggered after one-minute inactivity.

This trigger fires when the the cube was flipped

This trigger fires when the cube was pushed.

This trigger fires when the cube was rotated.

This trigger fires when the cube was tapped twice.

This trigger fires when the cube was shaken.

This trigger fires when the drop is detected.

This trigger fires when the tilt is detected.

This trigger fires when the vibration is detected.

This trigger fires when the specified curtain is fully opened/closed.

This trigger fires when single press the specified switch.

This trigger fires when single press the specified switch.

The battery of the device is low

This trigger fires when When Bell ringing is detected

This trigger fires when Forcible demolition alarm detected

This trigger fires when recognize the specified face

This trigger fires when recognize strange faces

This trigger fires when somebody is lingering at your doorstep

This trigger fires when the cube flip to side 1

This trigger fires when the cube flip to side 2

This trigger fires when the cube flip to side 3

This trigger fires when the cube flip to side 4

This trigger fires when the cube flip to side 5

This trigger fires when the cube flip to side 6

This trigger fires when an event is detected in the zone

This trigger fires when the camera recognize the specified vehicle

This trigger fires when the S1E switch is clicked.

This trigger fires when presence detected.

This trigger fires when absence detected.

This trigger fires when when the camera detects pet.

This trigger fires when when the camera detects package.

This trigger fires when the camera detects detects unknown vehicle.

This trigger fires when when the camera detects human.

This query returns the current temperature.

This query returns all lights of the bridge.

This query returns current humidity.

This action will wake up the specified camera.

This Action well set a scene on your hue lights. NOTE: in order to add lights to a room, you must be using the newest version of the Hue app

This action will sleep the specified camera.

This Action will turn on your hue lights.

This action will wake up / sleep of the specified camera.

This Action will turn off your hue lights.

This action will enable motion detection of the specified camera.

This Action will toggle your hue lights on or off.

This action will enable sound detection of the specified camera.

This Action will briefly turn your hue lights off then back on.

This action will disable motion detection of the specified camera.

This Action will dim or brighten your hue lights to a value between 0-100.

This action will disable sound detection of the specified camera.

This Action will change the color of your hue lights. NOTE: Accepts color names and CSS hex color values. Defaults to white if no color match is found. NOTE: not compatible with hue lux bulbs.

This action will enable / disable motion detection of the specified camera.

This Action will change your hue lights to a randomly selected color. NOTE: not compatible with hue lux bulbs.

This action will enable / disable sound detection of the specified camera.

This Action will change the color of your hue lights to match the dominant colors found in an image you specify. NOTE: not compatible with hue lux bulbs.

This action will turn on/off the plug of your choosing.

This Action will turn on a slow color loop effect for your hue lights. NOTE: not compatible with hue lux bulbs.

This action will turn on/off the single rocker switches of your choosing.

This action will turn on/off the double rocker switches of your choosing.

This action will turn on/off the triple rocker switches of your choosing.

This action will turn on/off the wireless relay controller of your choosing.

This action will turn on/off the light of your choosing.

This action will open the curtain of your choosing.

This action will close the curtain of your choosing.

This action will open/close the curtain of your choosing.

This action will stop the curtain of your choosing.

This action will open the curtain of your choosing to the designated position.

This action will make feeder feed once

This action will Set the light of brightness

This action will set the color temperature of lamp

This action will set the color of the light

This action will Turn on/off the light of your choosing.

This action will run the light scenario