Activate siren when alert is generated
Start today
Triggers (If this)
Queries (With)
Actions (Then that)
Other popular iSpy Agent workflows and automations
-
-
-
iSpy Motion Changes Wiz Color
-
-
If New saved track, then Take a photo with Not Connected
2
-
-
Disable alerts when you enter an area
59
-
-
Switch on a SmartThings device when an alert is generated
1
-
-
Send IFTTT notification and email when iSpy Agent generates an alert
23
-
-
Shuut
1
-
-
Enable alerts when you exit an area
87
-
-
Send SMS when an alert is generated
12
-
Build your own iSpy Agent and Smart Life automations
Triggers (If this)
-
Device or group is turned on
This trigger fires when the specified device/group is turned on.
-
Motion detected
This trigger fires when motion is detected on the selected camera.
-
Device or group is turned off
This trigger fires when the specified device/group is turned off.
-
Alert
This trigger fires when an alert is raised by the selected device.
-
Unlock the lock
This trigger fires when user unlocking the lock, his password or fingerprint identification or card is confirmed.
-
Sound detected
This trigger fires when sound is detected on the selected microphone
-
Camera detects motion
This trigger fires when the specified camera detects motion. To use this trigger, camera’s motion detection should be turned on.
-
Camera detects sound
This trigger fires when the specified camera detects sound. To use this trigger, camera’s sound detection should be turned on.
-
Input incorrect password repetitiously
This trigger fires when someone input incorrect password repetitiously.
-
Battery low
This trigger fires when residual electricity in the lock under threshold.
-
Door sensor is open
This trigger fires when the door sensor is open.
-
Door sensor is closed
This trigger fires when the door sensor is closed.
-
Person is detected
This trigger fires when PIR detects person.
-
Leak detected
This trigger fires when water leak detected.
-
Sound and light detected
This trigger fires when water sound and light detected.
-
Shake detected
This trigger fires when sensor shake detected
Device or group is turned on
This trigger fires when the specified device/group is turned on.
Motion detected
This trigger fires when motion is detected on the selected camera.
Device or group is turned off
This trigger fires when the specified device/group is turned off.
Alert
This trigger fires when an alert is raised by the selected device.
Unlock the lock
This trigger fires when user unlocking the lock, his password or fingerprint identification or card is confirmed.
Sound detected
This trigger fires when sound is detected on the selected microphone
Camera detects motion
This trigger fires when the specified camera detects motion. To use this trigger, camera’s motion detection should be turned on.
Camera detects sound
This trigger fires when the specified camera detects sound. To use this trigger, camera’s sound detection should be turned on.
Input incorrect password repetitiously
This trigger fires when someone input incorrect password repetitiously.
Battery low
This trigger fires when residual electricity in the lock under threshold.
Door sensor is open
This trigger fires when the door sensor is open.
Door sensor is closed
This trigger fires when the door sensor is closed.
Person is detected
This trigger fires when PIR detects person.
Leak detected
This trigger fires when water leak detected.
Sound and light detected
This trigger fires when water sound and light detected.
Shake detected
This trigger fires when sensor shake detected
Queries (With)
-
History of Leak detected
This query returns a list of times when the sensor detected a water leak.
-
History of sound detections
This query returns a list of when sound was detected on the selected microphone
-
History of when Door sensor was closed
This query returns a list of times when the door sensor was closed.
-
History of Alerts
This query returns a list of when an alert was raised by the selected device.
-
History of when Door sensor was open
This query returns a list of times when the door sensor was open.
-
History of when a Person was detected
This query returns a list of when PIR detected person.
-
History of Device turned off
This query returns a list of times when the specified device/group was turned off.
-
History of Device was turned on
This query returns a list of when the specified device/group was turned on.
-
History of repetitious incorrect password alerts
This query returns a list of times when someone input an incorrect password repetitiously.
-
History of motion detections by Camera
This query returns a list of when a Camera detected motion. To use this query, Camera motion detected should be turned on.
-
History of Camera detected sound
This query returns a list of times when the specified camera detected sound. To use this query, camera’s sound detection must have been turned on.
-
History of Shake detected
This query returns a list of when sensor detected a shake
-
History of when lock unlocked
This query returns a list of when a user unloocked the lock and his password, fingerprint identification, or card was confirmed.
-
History of Sound or Light Detected
This query returns a list of when water sound or light were detected.
-
History of low Battery alerts
This query returns a list of when residual electricity in the lock dropped below the threshold. Note: this query will only return future events after this Applet is created.
History of Leak detected
This query returns a list of times when the sensor detected a water leak.
History of sound detections
This query returns a list of when sound was detected on the selected microphone
History of when Door sensor was closed
This query returns a list of times when the door sensor was closed.
History of Alerts
This query returns a list of when an alert was raised by the selected device.
History of when Door sensor was open
This query returns a list of times when the door sensor was open.
History of when a Person was detected
This query returns a list of when PIR detected person.
History of Device turned off
This query returns a list of times when the specified device/group was turned off.
History of Device was turned on
This query returns a list of when the specified device/group was turned on.
History of repetitious incorrect password alerts
This query returns a list of times when someone input an incorrect password repetitiously.
History of motion detections by Camera
This query returns a list of when a Camera detected motion. To use this query, Camera motion detected should be turned on.
History of Camera detected sound
This query returns a list of times when the specified camera detected sound. To use this query, camera’s sound detection must have been turned on.
History of Shake detected
This query returns a list of when sensor detected a shake
History of when lock unlocked
This query returns a list of when a user unloocked the lock and his password, fingerprint identification, or card was confirmed.
History of Sound or Light Detected
This query returns a list of when water sound or light were detected.
History of low Battery alerts
This query returns a list of when residual electricity in the lock dropped below the threshold. Note: this query will only return future events after this Applet is created.
Actions (Then that)
-
Take a photo
This action will make the selected camera take a photo.
-
Turn on
This action will turn on the device/group of your choosing.
-
Enable a device
This action will enable (switch on) the selected device.
-
Turn off
This action will turn off the device/group of your choosing.
-
Disable detection
This action will disable motion detection on cameras or sound detection on microphones.
-
Activate Scene
This action will activate the specified scene.
-
Enable detection
This action will enable motion detection on cameras or sound detection on microphones.
-
Set light brightness
This action will set your light to a specified brightness.
-
Disable a device
This action will disable the selected device.
-
Set light color
This action will set the light to specified color.
-
Alert
Trigger an alert on the selected device.
-
Start Cool Mode
This action will set your AC to Cool Mode.
-
Arm a device
Arm the selected device (switch alerts on).
-
Start Heat Mode
This action will set your AC to Heat Mode.
-
Disarm a device
Disarm the selected device (switch alerts off).
-
Set AC temperature
This action will set your AC to a specified temperature by remote controller.
-
Arm server
This action will arm the master alerts switch on Agent DVR.
-
Turn on oscillation function of fan
This action will turn on the oscillation function of your fan by IR remote controller.
-
Set profile
This action will apply the specified profile (home, away or night).
-
Turn off oscillation function of fan
This action will turn off the oscillation function of your fan by IR remote controller.
-
Disarm server
This action will disarm the master alerts on Agent DVR.
-
Run a command
This action will execute a command on the computer running Agent DVR.
Take a photo
This action will make the selected camera take a photo.
Turn on
This action will turn on the device/group of your choosing.
Enable a device
This action will enable (switch on) the selected device.
Turn off
This action will turn off the device/group of your choosing.
Disable detection
This action will disable motion detection on cameras or sound detection on microphones.
Activate Scene
This action will activate the specified scene.
Enable detection
This action will enable motion detection on cameras or sound detection on microphones.
Set light brightness
This action will set your light to a specified brightness.
Disable a device
This action will disable the selected device.
Set light color
This action will set the light to specified color.
Alert
Trigger an alert on the selected device.
Start Cool Mode
This action will set your AC to Cool Mode.
Arm a device
Arm the selected device (switch alerts on).
Start Heat Mode
This action will set your AC to Heat Mode.
Disarm a device
Disarm the selected device (switch alerts off).
Set AC temperature
This action will set your AC to a specified temperature by remote controller.
Arm server
This action will arm the master alerts switch on Agent DVR.
Turn on oscillation function of fan
This action will turn on the oscillation function of your fan by IR remote controller.
Set profile
This action will apply the specified profile (home, away or night).
Turn off oscillation function of fan
This action will turn off the oscillation function of your fan by IR remote controller.
Disarm server
This action will disarm the master alerts on Agent DVR.
Run a command
This action will execute a command on the computer running Agent DVR.
IFTTT helps all your apps and devices work better together