This Trigger fires if the iZone system is turned off.

Send IFTTT any email at trigger@applet.ifttt.com and this Trigger fires. You can optionally add a single file attachment and IFTTT will create a public URL to the file as an Ingredient. This trigger will reject emails with attachments over 30MB.

This trigger fires when an iLight is turned on.

Send IFTTT an email at trigger@applet.ifttt.com with a hashtag in the subject (e.g. #IFTTT) and this Trigger fires. You can optionally add a single file attachment (up to 30MB) and IFTTT will create a public URL to the file as an Ingredient.

This trigger fires when an iLight is turned off.

This trigger fires when one iLight switch battery low alarmed.

This trigger fires when your iDrate is turned on.

This Trigger fires if the A/C systems supply air temperature rises above a specified threshold.

This Trigger fires if the iZone systems supply air temperature falls below a specified threshold.

This trigger fires when your iDrate is turned off.

This Trigger fires when a zone's actual temperature rises above a specified threshold.

This trigger fires when an iDrate controller detects a fault.

This trigger fires when an iDrate Station detects a fault.

This Trigger fires when a zone's actual temperature falls below a specified threshold.

This Trigger fires when the AC unit temperature rises above a specified threshold.

This Trigger fires when the AC unit temperature falls below a specified threshold.

This Trigger fires if the iZone system is turned on.

This query returns a list of if the iZone systems supply air temperature falls below a specified threshold. Note: this query will only return future events after this Applet is created.

This query returns a list of when an iDrate Station detects a fault.

This query returns a list of when an iLight was turned on.

This query returns a list of if the iZone system was turned off.

This query returns a list of when your iDrate was turned on.

This query returns a list of when an iLight was turned off.

This query returns a list of when the iZone system was turned on.

This query returns a list of when the AC unit temperature rises above a specified threshold. Note: this query will only return future events after this Applet is created.

This action will turn all iLights on.

This Action will send you an HTML based email. Images and links are supported.

This action will turn all iLights off.

This action will turn the specified iLight on.

This action will turn the specified iLight off.

This Action will decrease the A/C setpoint by the selected number of degrees celcius.

Change the brightness of an iLight.

This Action will set the selected zone to selected mode

This Action will set iSave for the selected iZone system. The iSave cools your whole home using your ducted reverse cycle air conditioner’s fan mode for only a few cents an hour.

This Action will change the iZone A/C system's setpoint temperature.

This Action will increase the A/C setpoint temperature by selected number of degrees celcius.

This Action will change the selected zone setpoint temperature.

This Action will increase the selected zone setpoint temperature by the selected number of degrees celcius.

This Action will decrease the selected zone setpoint temperature by the selected number of degrees celcius.

This action will change the colour of the iLight.

This action will change the special effect for the iLight.

This Action will activate the selected iZone favourite.

This action will activate a specified favourite for your iLight.

This action will run the selected Program on the iDrate.

This action will turn the iDrate system on.

This action will turn the iDrate system off.

This action will changes the iDrate weather mode to fine.

This action will run the selected iDrate station.

This action will change the station run times by the selected percentage. This will increase or decrease the programmed station running time.

This Action will turn on the iZone system.

This Action will change the iZone air condition system to the selected mode.

This Action will set the iZone A/C system to the selected fan speed.

This Action will turn off the iZone AC system.

This Action will set the A/C sleep timer to a predetermined period.