Turn on Cooling and Text Me When Outside Temp Rises
Other popular BlueLink Smart Connect workflows and automations
-
-
-
Increase the cooling temperature of your home during on-peak hours
-
-
Decrease the heating temperature of your home during on-peak hours
-
-
When You Enter an Area Change Room Temperature
-
-
Turn on the fan for one hour
-
-
Preheat your home before on-peak hours start
-
-
If the temperature outside rise above a chosen point, set the cool to chosen temperature
-
-
Every day at a certain time, modify the temperature in the room
-
-
When temperature drops below a certain point, start emergency heating
-
Build your own BlueLink Smart Connect and Email automations
Triggers (If this)
-
System Mode Change
This trigger fires when the system mode changes
-
Send IFTTT any email
Send IFTTT any email at trigger@applet.ifttt.com and this Trigger fires. You can optionally add a single file attachment and IFTTT will create a public URL to the file as an Ingredient. This trigger will reject emails with attachments over 30MB.
-
Room Temperature Drops Below
This trigger fires when the temperature in the room drops below the chosen temperature
-
Send IFTTT an email tagged
Send IFTTT an email at trigger@applet.ifttt.com with a hashtag in the subject (e.g. #IFTTT) and this Trigger fires. You can optionally add a single file attachment (up to 30MB) and IFTTT will create a public URL to the file as an Ingredient.
-
Room Temperature Rises Above
This trigger fires when the temperature in the room rise above the chosen temperature
-
Room Humidity Drops Below
This trigger fires when the humidity in the room drops below the specified percentage
-
Room Humidity Rises Above
This trigger fires when the humidity in the room rises above the specified percentage
-
Fan Mode Change
This trigger fires when fan mode is changed to the specified value
-
Hold Status Change
This trigger fires when the hold status of the device is changed to the specified value
-
Set Temperature Changes To Above X
This trigger fires when you set the setpoint of either heat or cool to a temperature above a threshold specified by you
-
Set Temperature Changes To Below X
This trigger fires when you set the setpoint of either heat or cool to a temperature below a threshold specified by you
-
Low Remote Sensor Battery
This trigger fires when the remote sensor battery is low
-
Low Thermostat Battery
This trigger fires when the thermostat battery is low
-
Check Warning
This trigger fires when the check warning activates
-
UV Warning
This trigger fires when the UV warning activates
-
HUMID PADS Warning
This trigger fires when the HUMID PADS warning activates
-
Filter Warning
This trigger fires when the filter warning activates
System Mode Change
This trigger fires when the system mode changes
Send IFTTT any email
Send IFTTT any email at trigger@applet.ifttt.com and this Trigger fires. You can optionally add a single file attachment and IFTTT will create a public URL to the file as an Ingredient. This trigger will reject emails with attachments over 30MB.
Room Temperature Drops Below
This trigger fires when the temperature in the room drops below the chosen temperature
Send IFTTT an email tagged
Send IFTTT an email at trigger@applet.ifttt.com with a hashtag in the subject (e.g. #IFTTT) and this Trigger fires. You can optionally add a single file attachment (up to 30MB) and IFTTT will create a public URL to the file as an Ingredient.
Room Temperature Rises Above
This trigger fires when the temperature in the room rise above the chosen temperature
Room Humidity Drops Below
This trigger fires when the humidity in the room drops below the specified percentage
Room Humidity Rises Above
This trigger fires when the humidity in the room rises above the specified percentage
Fan Mode Change
This trigger fires when fan mode is changed to the specified value
Hold Status Change
This trigger fires when the hold status of the device is changed to the specified value
Set Temperature Changes To Above X
This trigger fires when you set the setpoint of either heat or cool to a temperature above a threshold specified by you
Set Temperature Changes To Below X
This trigger fires when you set the setpoint of either heat or cool to a temperature below a threshold specified by you
Low Remote Sensor Battery
This trigger fires when the remote sensor battery is low
Low Thermostat Battery
This trigger fires when the thermostat battery is low
Check Warning
This trigger fires when the check warning activates
UV Warning
This trigger fires when the UV warning activates
HUMID PADS Warning
This trigger fires when the HUMID PADS warning activates
Filter Warning
This trigger fires when the filter warning activates
Queries (With)
Actions (Then that)
-
Change Room Temperature
This action will change the current room temperature. Will either HEAT or COOL, based on what temperature is the thermostat is showing.
-
Send me an email
This Action will send you an HTML based email. Images and links are supported.
-
Change Cool Setpoint
This action will change the current cool setpoint of the selected device.
-
Change Heat Setpoint
This action will change the current heat setpoint of the selected device.
-
Change Hold Status
This action will change the current hold status of the device (either ENABLED or DISABLED)
-
Change System Mode
This action will change the current running mode of the device
-
Change Fan Mode
This action will change the current fan mode of the device
-
Change Hold Mode
This action will change the current hold mode of the device
Change Room Temperature
This action will change the current room temperature. Will either HEAT or COOL, based on what temperature is the thermostat is showing.
Send me an email
This Action will send you an HTML based email. Images and links are supported.
Change Cool Setpoint
This action will change the current cool setpoint of the selected device.
Change Heat Setpoint
This action will change the current heat setpoint of the selected device.
Change Hold Status
This action will change the current hold status of the device (either ENABLED or DISABLED)
Change System Mode
This action will change the current running mode of the device
Change Fan Mode
This action will change the current fan mode of the device
Change Hold Mode
This action will change the current hold mode of the device
How to connect BlueLink Smart Connect and Email
Find or create an Applet
Start by discovering an automation to connect or customizing your own. It's quick and easy.Connect IFTTT to your accounts
Securely connect your BlueLink Smart Connect and Email accounts.Finalize and customize your Applet
Review your trigger and action settings. Your Applet is ready to go!
IFTTT helps all your apps and devices work better together