Send a notification when salinity level has turned too high
Other popular Blue Connect workflows and automations
-
-
-
Send a notification when salinity level has turned too low
-
-
Send an email when the pH has turned too high
15
-
-
Send a notification when PH level in the pool has turned too low
-
-
Turn on/off my eWeLink switch when the temperature >= setpoint
-
-
Log measurements of your swimming pool water in a Google spreadsheet
30
-
-
Send a notification when PH level in the pool has turned too high
-
-
Send a notification when water temp in the pool has turned too low
-
-
Send an SMS when there's new water measurement
-
Build your own Blue Connect and Smart Life automations
Triggers (If this)
-
New water measurement
This trigger fires every time a new water measurement of a swimming pool is available.
-
Device or group is turned on
This trigger fires when the specified device/group is turned on.
-
Temperature becomes too low
This trigger fires when the temperature of your pool water has been evaluated as too low according to your swimming pool target values.
-
Device or group is turned off
This trigger fires when the specified device/group is turned off.
-
Temperature becomes OK
This trigger fires when the temperature of your pool water has been evaluated as OK according to your swimming pool target values.
-
Unlock the lock
This trigger fires when user unlocking the lock, his password or fingerprint identification or card is confirmed.
-
Temperature becomes too high
This trigger fires when the temperature of your pool water has been evaluated as too high according to your swimming pool target values.
-
Camera detects motion
This trigger fires when the specified camera detects motion. To use this trigger, camera’s motion detection should be turned on.
-
PH becomes too low
This trigger fires when the pH of your pool water has been evaluated as too low according to your swimming pool target values.
-
Camera detects sound
This trigger fires when the specified camera detects sound. To use this trigger, camera’s sound detection should be turned on.
-
PH becomes OK
This trigger fires when the pH of your pool water has been evaluated as OK according to your swimming pool target values.
-
Input incorrect password repetitiously
This trigger fires when someone input incorrect password repetitiously.
-
PH becomes too high
This trigger fires when the pH of your pool water has been evaluated as too high according to your swimming pool target values.
-
Battery low
This trigger fires when residual electricity in the lock under threshold.
-
ORP becomes too low
This trigger fires when the ORP of your pool water has been evaluated as too low according to your swimming pool target values.
-
Door sensor is open
This trigger fires when the door sensor is open.
-
ORP becomes OK
This trigger fires when the ORP of your pool water has been evaluated as OK according to your swimming pool target values.
-
Door sensor is closed
This trigger fires when the door sensor is closed.
-
ORP becomes too high
This trigger fires when the ORP of your pool water has been evaluated as too high according to your swimming pool target values.
-
Person is detected
This trigger fires when PIR detects person.
-
Salinity becomes too low
This trigger fires when the salinity of your pool water has been evaluated as too low according to your swimming pool target values.
-
Leak detected
This trigger fires when water leak detected.
-
Salinity becomes OK
This trigger fires when the salinity of your pool water has been evaluated as OK according to your swimming pool target values.
-
Sound and light detected
This trigger fires when water sound and light detected.
-
Salinity becomes too high
This trigger fires when the salinity of your pool water has been evaluated as too high according to your swimming pool target values.
-
Shake detected
This trigger fires when sensor shake detected
-
No measurement received
This trigger fires when no measurement has been received for the last 2 hours.
-
Temperature is < setpoint
This trigger fires when the temperature of your pool water is lower than your swimming pool "temperature setpoint".
-
Temperature is >= setpoint
This trigger fires when the temperature of your pool water is greater or equal to your swimming pool "temperature setpoint".
-
PH is <= setpoint
This trigger fires when the pH of your pool water is lower or equal to your swimming pool "pH setpoint".
-
PH is > setpoint
This trigger fires when the pH of your pool water is greater than your swimming pool "pH setpoint".
-
ORP is < setpoint
This trigger fires when the ORP of your pool water is smaller than your swimming pool "ORP setpoint".
-
ORP is >= setpoint
This trigger fires when the ORP of your pool water is greather or equal to your swimming pool "ORP setpoint".
New water measurement
This trigger fires every time a new water measurement of a swimming pool is available.
Device or group is turned on
This trigger fires when the specified device/group is turned on.
Temperature becomes too low
This trigger fires when the temperature of your pool water has been evaluated as too low according to your swimming pool target values.
Device or group is turned off
This trigger fires when the specified device/group is turned off.
Temperature becomes OK
This trigger fires when the temperature of your pool water has been evaluated as OK according to your swimming pool target values.
Unlock the lock
This trigger fires when user unlocking the lock, his password or fingerprint identification or card is confirmed.
Temperature becomes too high
This trigger fires when the temperature of your pool water has been evaluated as too high according to your swimming pool target values.
Camera detects motion
This trigger fires when the specified camera detects motion. To use this trigger, camera’s motion detection should be turned on.
PH becomes too low
This trigger fires when the pH of your pool water has been evaluated as too low according to your swimming pool target values.
Camera detects sound
This trigger fires when the specified camera detects sound. To use this trigger, camera’s sound detection should be turned on.
PH becomes OK
This trigger fires when the pH of your pool water has been evaluated as OK according to your swimming pool target values.
Input incorrect password repetitiously
This trigger fires when someone input incorrect password repetitiously.
PH becomes too high
This trigger fires when the pH of your pool water has been evaluated as too high according to your swimming pool target values.
Battery low
This trigger fires when residual electricity in the lock under threshold.
ORP becomes too low
This trigger fires when the ORP of your pool water has been evaluated as too low according to your swimming pool target values.
Door sensor is open
This trigger fires when the door sensor is open.
ORP becomes OK
This trigger fires when the ORP of your pool water has been evaluated as OK according to your swimming pool target values.
Door sensor is closed
This trigger fires when the door sensor is closed.
ORP becomes too high
This trigger fires when the ORP of your pool water has been evaluated as too high according to your swimming pool target values.
Person is detected
This trigger fires when PIR detects person.
Salinity becomes too low
This trigger fires when the salinity of your pool water has been evaluated as too low according to your swimming pool target values.
Leak detected
This trigger fires when water leak detected.
Salinity becomes OK
This trigger fires when the salinity of your pool water has been evaluated as OK according to your swimming pool target values.
Sound and light detected
This trigger fires when water sound and light detected.
Salinity becomes too high
This trigger fires when the salinity of your pool water has been evaluated as too high according to your swimming pool target values.
Shake detected
This trigger fires when sensor shake detected
No measurement received
This trigger fires when no measurement has been received for the last 2 hours.
Temperature is < setpoint
This trigger fires when the temperature of your pool water is lower than your swimming pool "temperature setpoint".
Temperature is >= setpoint
This trigger fires when the temperature of your pool water is greater or equal to your swimming pool "temperature setpoint".
PH is <= setpoint
This trigger fires when the pH of your pool water is lower or equal to your swimming pool "pH setpoint".
PH is > setpoint
This trigger fires when the pH of your pool water is greater than your swimming pool "pH setpoint".
ORP is < setpoint
This trigger fires when the ORP of your pool water is smaller than your swimming pool "ORP setpoint".
ORP is >= setpoint
This trigger fires when the ORP of your pool water is greather or equal to your swimming pool "ORP setpoint".
Queries (With)
-
History of Leak detected
This query returns a list of times when the sensor detected a water leak.
-
History of water measurement
This query returns a list of every time a new water measurement of a swimming pool was available.
-
History of when Door sensor was closed
This query returns a list of times when the door sensor was closed.
-
History of salinity becomes too high
This query returns a list of when the salinity of your pool water was been evaluated as too high according to your swimming pool target values.
-
History of when Door sensor was open
This query returns a list of times when the door sensor was open.
-
History of ORP becomes too high
This query returns a list of when the ORP of your pool water was been evaluated as too high according to your swimming pool target values.
-
History of when a Person was detected
This query returns a list of when PIR detected person.
-
History of ORP OK evaluations
This query returns a list of times the ORP of your pool water was evaluated as OK according to your swimming pool target values.
-
History of Device turned off
This query returns a list of times when the specified device/group was turned off.
-
History of when temperature became too high
This query returns a list of when the temperature of your pool water was been evaluated as too high according to your swimming pool target values.
-
History of Device was turned on
This query returns a list of when the specified device/group was turned on.
-
History of pH becomes OK
This query returns a list of when the pH of your pool water was been evaluated as OK according to your swimming pool target values.
-
History of repetitious incorrect password alerts
This query returns a list of times when someone input an incorrect password repetitiously.
-
History of salinity becomes too low
This query returns a list of when the salinity of your pool water was been evaluated as too low according to your swimming pool target values.
-
History of motion detections by Camera
This query returns a list of when a Camera detected motion. To use this query, Camera motion detected should be turned on.
-
History of recent "ORP is < setpoint" alerts
This query returns a list of recent alerts when the ORP of your swimming pool water was smaller than your swimming pool "ORP setpoint"
-
History of Camera detected sound
This query returns a list of times when the specified camera detected sound. To use this query, camera’s sound detection must have been turned on.
-
History of Shake detected
This query returns a list of when sensor detected a shake
-
History of when lock unlocked
This query returns a list of when a user unloocked the lock and his password, fingerprint identification, or card was confirmed.
-
History of Sound or Light Detected
This query returns a list of when water sound or light were detected.
-
History of low Battery alerts
This query returns a list of when residual electricity in the lock dropped below the threshold. Note: this query will only return future events after this Applet is created.
History of Leak detected
This query returns a list of times when the sensor detected a water leak.
History of water measurement
This query returns a list of every time a new water measurement of a swimming pool was available.
History of when Door sensor was closed
This query returns a list of times when the door sensor was closed.
History of salinity becomes too high
This query returns a list of when the salinity of your pool water was been evaluated as too high according to your swimming pool target values.
History of when Door sensor was open
This query returns a list of times when the door sensor was open.
History of ORP becomes too high
This query returns a list of when the ORP of your pool water was been evaluated as too high according to your swimming pool target values.
History of when a Person was detected
This query returns a list of when PIR detected person.
History of ORP OK evaluations
This query returns a list of times the ORP of your pool water was evaluated as OK according to your swimming pool target values.
History of Device turned off
This query returns a list of times when the specified device/group was turned off.
History of when temperature became too high
This query returns a list of when the temperature of your pool water was been evaluated as too high according to your swimming pool target values.
History of Device was turned on
This query returns a list of when the specified device/group was turned on.
History of pH becomes OK
This query returns a list of when the pH of your pool water was been evaluated as OK according to your swimming pool target values.
History of repetitious incorrect password alerts
This query returns a list of times when someone input an incorrect password repetitiously.
History of salinity becomes too low
This query returns a list of when the salinity of your pool water was been evaluated as too low according to your swimming pool target values.
History of motion detections by Camera
This query returns a list of when a Camera detected motion. To use this query, Camera motion detected should be turned on.
History of recent "ORP is < setpoint" alerts
This query returns a list of recent alerts when the ORP of your swimming pool water was smaller than your swimming pool "ORP setpoint"
History of Camera detected sound
This query returns a list of times when the specified camera detected sound. To use this query, camera’s sound detection must have been turned on.
History of Shake detected
This query returns a list of when sensor detected a shake
History of when lock unlocked
This query returns a list of when a user unloocked the lock and his password, fingerprint identification, or card was confirmed.
History of Sound or Light Detected
This query returns a list of when water sound or light were detected.
History of low Battery alerts
This query returns a list of when residual electricity in the lock dropped below the threshold. Note: this query will only return future events after this Applet is created.
Actions (Then that)
-
Turn on
This action will turn on the device/group of your choosing.
-
Turn off
This action will turn off the device/group of your choosing.
-
Activate Scene
This action will activate the specified scene.
-
Set light brightness
This action will set your light to a specified brightness.
-
Set light color
This action will set the light to specified color.
-
Start Cool Mode
This action will set your AC to Cool Mode.
-
Start Heat Mode
This action will set your AC to Heat Mode.
-
Set AC temperature
This action will set your AC to a specified temperature by remote controller.
-
Turn on oscillation function of fan
This action will turn on the oscillation function of your fan by IR remote controller.
-
Turn off oscillation function of fan
This action will turn off the oscillation function of your fan by IR remote controller.
Turn on
This action will turn on the device/group of your choosing.
Turn off
This action will turn off the device/group of your choosing.
Activate Scene
This action will activate the specified scene.
Set light brightness
This action will set your light to a specified brightness.
Set light color
This action will set the light to specified color.
Start Cool Mode
This action will set your AC to Cool Mode.
Start Heat Mode
This action will set your AC to Heat Mode.
Set AC temperature
This action will set your AC to a specified temperature by remote controller.
Turn on oscillation function of fan
This action will turn on the oscillation function of your fan by IR remote controller.
Turn off oscillation function of fan
This action will turn off the oscillation function of your fan by IR remote controller.
How to connect Blue Connect and Smart Life
Find or create an Applet
Start by discovering an automation to connect or customizing your own. It's quick and easy.Connect IFTTT to your accounts
Securely connect your Blue Connect and Smart Life accounts.Finalize and customize your Applet
Review your trigger and action settings. Your Applet is ready to go!Top integration tips, tools, and resources
-
Smart home
How to use NFC tags for Android and iPhone
-
Smart home
The best robot lawn mowers of 2025 guide
-
Business
Best email apps for Android in 2025
-
Smart home
Best smart home devices of 2024
-
Smart home
How to power cycle Wyze camera
-
Smart home
Uncovering the best weather apps for accurate forecasting
IFTTT helps all your apps and devices work better together