Run a scene when connected to specific wifi
Start today
Triggers (If this)
Queries (With)
Actions (Then that)
Other popular AYPRO workflows and automations
-
-
-
Blink lights on security mode changed
-
-
Panel Disconnect Light Toggle
-
-
Scene Alert
-
-
Set security alarm when I exit a location
-
-
Set security alarm on with Google Assistant
-
-
Blink lights on doorbell ringing
-
-
Secure Zone Activation
-
-
Lights Red Blink when the security alarm rings
-
Useful AYPRO and Smart Life integrations
Triggers (If this)
-
Device or group is turned on
This trigger fires when the specified device/group is turned on.
-
The scene runs.
This trigger fires when the selected scene runs.
-
Device or group is turned off
This trigger fires when the specified device/group is turned off.
-
Incoming call from intercom.
This trigger fires when there is incoming call from intercom.
-
Unlock the lock
This trigger fires when user unlocking the lock, his password or fingerprint identification or card is confirmed.
-
Alarm triggered
This trigger fires when alarm triggered.
-
Camera detects motion
This trigger fires when the specified camera detects motion. To use this trigger, camera’s motion detection should be turned on.
-
Security mode changed.
This trigger fires when your security mode changed.
-
Camera detects sound
This trigger fires when the specified camera detects sound. To use this trigger, camera’s sound detection should be turned on.
-
Security mode set to "ARMED".
This trigger when your security mode set to "ARMED"
-
Input incorrect password repetitiously
This trigger fires when someone input incorrect password repetitiously.
-
Security mode set to "DISARMED"
This trigger fires when your security mode set to "DISARMED"
-
Battery low
This trigger fires when residual electricity in the lock under threshold.
-
Security mode set to "SLEEP".
This trigger fires when your security mode set to "SLEEP".
-
Door sensor is open
This trigger fires when the door sensor is open.
-
Security mode set to "CUSTOM".
This trigger fires when your security mode set to "CUSTOM"
-
Door sensor is closed
This trigger fires when the door sensor is closed.
-
Security mode set to your choice.
This trigger fires when your security mode set to your choice.
-
Person is detected
This trigger fires when PIR detects person.
-
Scope A6 TouchPanel disconnected!
This trigger fires when Scope A6 Touch Panel is disconnected from SmartBridge.
-
Leak detected
This trigger fires when water leak detected.
-
SOS Button is pressed
This trigger works when the SOS button is pressed.
-
Sound and light detected
This trigger fires when water sound and light detected.
-
Doorbell Rings
This trigger fires when doorbell rings.
-
Shake detected
This trigger fires when sensor shake detected
Device or group is turned on
This trigger fires when the specified device/group is turned on.
The scene runs.
This trigger fires when the selected scene runs.
Device or group is turned off
This trigger fires when the specified device/group is turned off.
Incoming call from intercom.
This trigger fires when there is incoming call from intercom.
Unlock the lock
This trigger fires when user unlocking the lock, his password or fingerprint identification or card is confirmed.
Alarm triggered
This trigger fires when alarm triggered.
Camera detects motion
This trigger fires when the specified camera detects motion. To use this trigger, camera’s motion detection should be turned on.
Security mode changed.
This trigger fires when your security mode changed.
Camera detects sound
This trigger fires when the specified camera detects sound. To use this trigger, camera’s sound detection should be turned on.
Security mode set to "ARMED".
This trigger when your security mode set to "ARMED"
Input incorrect password repetitiously
This trigger fires when someone input incorrect password repetitiously.
Security mode set to "DISARMED"
This trigger fires when your security mode set to "DISARMED"
Battery low
This trigger fires when residual electricity in the lock under threshold.
Security mode set to "SLEEP".
This trigger fires when your security mode set to "SLEEP".
Door sensor is open
This trigger fires when the door sensor is open.
Security mode set to "CUSTOM".
This trigger fires when your security mode set to "CUSTOM"
Door sensor is closed
This trigger fires when the door sensor is closed.
Security mode set to your choice.
This trigger fires when your security mode set to your choice.
Person is detected
This trigger fires when PIR detects person.
Scope A6 TouchPanel disconnected!
This trigger fires when Scope A6 Touch Panel is disconnected from SmartBridge.
Leak detected
This trigger fires when water leak detected.
SOS Button is pressed
This trigger works when the SOS button is pressed.
Sound and light detected
This trigger fires when water sound and light detected.
Doorbell Rings
This trigger fires when doorbell rings.
Shake detected
This trigger fires when sensor shake detected
Queries (With)
-
History of Leak detected
This query returns a list of times when the sensor detected a water leak.
-
Scenes
This query returns scenes from device
-
History of when Door sensor was closed
This query returns a list of times when the door sensor was closed.
-
History of when Door sensor was open
This query returns a list of times when the door sensor was open.
-
History of when a Person was detected
This query returns a list of when PIR detected person.
-
History of Device turned off
This query returns a list of times when the specified device/group was turned off.
-
History of Device was turned on
This query returns a list of when the specified device/group was turned on.
-
History of repetitious incorrect password alerts
This query returns a list of times when someone input an incorrect password repetitiously.
-
History of motion detections by Camera
This query returns a list of when a Camera detected motion. To use this query, Camera motion detected should be turned on.
-
History of Camera detected sound
This query returns a list of times when the specified camera detected sound. To use this query, camera’s sound detection must have been turned on.
-
History of Shake detected
This query returns a list of when sensor detected a shake
-
History of when lock unlocked
This query returns a list of when a user unloocked the lock and his password, fingerprint identification, or card was confirmed.
-
History of Sound or Light Detected
This query returns a list of when water sound or light were detected.
-
History of low Battery alerts
This query returns a list of when residual electricity in the lock dropped below the threshold. Note: this query will only return future events after this Applet is created.
History of Leak detected
This query returns a list of times when the sensor detected a water leak.
Scenes
This query returns scenes from device
History of when Door sensor was closed
This query returns a list of times when the door sensor was closed.
History of when Door sensor was open
This query returns a list of times when the door sensor was open.
History of when a Person was detected
This query returns a list of when PIR detected person.
History of Device turned off
This query returns a list of times when the specified device/group was turned off.
History of Device was turned on
This query returns a list of when the specified device/group was turned on.
History of repetitious incorrect password alerts
This query returns a list of times when someone input an incorrect password repetitiously.
History of motion detections by Camera
This query returns a list of when a Camera detected motion. To use this query, Camera motion detected should be turned on.
History of Camera detected sound
This query returns a list of times when the specified camera detected sound. To use this query, camera’s sound detection must have been turned on.
History of Shake detected
This query returns a list of when sensor detected a shake
History of when lock unlocked
This query returns a list of when a user unloocked the lock and his password, fingerprint identification, or card was confirmed.
History of Sound or Light Detected
This query returns a list of when water sound or light were detected.
History of low Battery alerts
This query returns a list of when residual electricity in the lock dropped below the threshold. Note: this query will only return future events after this Applet is created.
Actions (Then that)
-
Turn on
This action will turn on the device/group of your choosing.
-
Run scene
This action will runs your scene.
-
Turn off
This action will turn off the device/group of your choosing.
-
Set security alarm mode to "ARMED"
This action will set your security alarm mode to "ARMED".
-
Activate Scene
This action will activate the specified scene.
-
Set security alarm mode to "CUSTOM"
This action will set your security alarm mode to "CUSTOM".
-
Set light brightness
This action will set your light to a specified brightness.
-
Set security alarm mode to "DISARMED
This action will set your security alarm mode to "DISARMED".
-
Set light color
This action will set the light to specified color.
-
Set security alarm mode to "SLEEP"
This action will set your security alarm mode to "SLEEP".
-
Start Cool Mode
This action will set your AC to Cool Mode.
-
Set Scope TouchPanel's ambiance Led Color
This action will sets your Scope Touch Panel ambiance led color.
-
Start Heat Mode
This action will set your AC to Heat Mode.
-
Set Scope TouchPanel's ambiance Led Animation
This action will sets your Scope TouchPanel's ambiance led animation.
-
Set AC temperature
This action will set your AC to a specified temperature by remote controller.
-
Scope TouchPanel's ambiance Led Customized Color
This action will sets your Scope TouchPanel's ambiance Led to customized color.
-
Turn on oscillation function of fan
This action will turn on the oscillation function of your fan by IR remote controller.
-
Turn off oscillation function of fan
This action will turn off the oscillation function of your fan by IR remote controller.
Turn on
This action will turn on the device/group of your choosing.
Run scene
This action will runs your scene.
Turn off
This action will turn off the device/group of your choosing.
Set security alarm mode to "ARMED"
This action will set your security alarm mode to "ARMED".
Activate Scene
This action will activate the specified scene.
Set security alarm mode to "CUSTOM"
This action will set your security alarm mode to "CUSTOM".
Set light brightness
This action will set your light to a specified brightness.
Set security alarm mode to "DISARMED
This action will set your security alarm mode to "DISARMED".
Set light color
This action will set the light to specified color.
Set security alarm mode to "SLEEP"
This action will set your security alarm mode to "SLEEP".
Start Cool Mode
This action will set your AC to Cool Mode.
Set Scope TouchPanel's ambiance Led Color
This action will sets your Scope Touch Panel ambiance led color.
Start Heat Mode
This action will set your AC to Heat Mode.
Set Scope TouchPanel's ambiance Led Animation
This action will sets your Scope TouchPanel's ambiance led animation.
Set AC temperature
This action will set your AC to a specified temperature by remote controller.
Scope TouchPanel's ambiance Led Customized Color
This action will sets your Scope TouchPanel's ambiance Led to customized color.
Turn on oscillation function of fan
This action will turn on the oscillation function of your fan by IR remote controller.
Turn off oscillation function of fan
This action will turn off the oscillation function of your fan by IR remote controller.
IFTTT helps all your apps and devices work better together