Connect Agile Octopus to eWeLink Smart Home and unlock powerful automations

This trigger fires when your eWeLink Support 4-Channel Plug is turned on or off.

Use this trigger to fire something when your electricity price falls or rises past your set threshold and between your preferred time settings.

This trigger fires when your eWeLink Support 3-Channel Plug is turned on or off.

Use this trigger to fire something when your electricity export price falls or rises past your set threshold and between your preferred time settings.

This trigger fires when your eWeLink 2-Channel Plug is turned on or off.

Use this trigger to fire something when your electricity price stays above (or below) your set threshold for a minimum length of time in 30-minute blocks.

This trigger fires when your eWeLink Support 1-Channel Plug is turned on or off.

Use this trigger to fire something when your electricity price is at the lowest and for a set duration (such as an hour) and between your preferred time settings.

This trigger fires when your eWeLink Support 4-Channel Switch is turned on or off.

Use this trigger to fire something when you have consumed a set amount of electricity (measured in kWh) in a period.

This trigger fires when your eWeLink 3-Channel Switch is turned on or off.

Use this trigger to fire something when you have exported a set amount of electricity (measured in kWh) in a period.

This trigger fires when your eWeLink Support 2-Channel Switch is turned on or off.

Use this Trigger to do something when the carbon intensity is at its lowest and between your preferred time settings.

This trigger fires when your eWeLink Support 1-Channel Switch is turned on or off.

Use this Trigger to do something when the carbon intensity is at its highest and between your preferred time settings.

This trigger fires when your eWeLink Support Smart Dimmer is turned on or off.

Use this trigger to fire something when carbon intensity falls or rises past your set threshold and between your preferred time settings.

This trigger fires when the brightness of selected dimmer is above threshold.

Use this trigger to fire something when carbon intensity stays above (or below) your set threshold for a minimum length of time in 30-minute blocks.

This trigger fires when the brightness of selected dimmer is below threshold.

Use this trigger to fire something when your electricity prices for the day ahead are published.

This trigger fires when the state of selected door sensor is open or closed.

Use this trigger to fire something when your electricity prices for the day ahead are published and are below your set threshold.

This trigger fires when the temperature of selected device goes above or below threshold.

Use this trigger to fire something when electricity price for each half hour period for the day ahead is published.

This trigger fires when the humidity of selected device goes above or below threshold.

Use this trigger to fire something when your electricity export price is at the highest and for a set duration (such as an hour) and between your preferred time settings.

This trigger fires when the voltage of selected device is above or below threshold.

Use this trigger to fire something when your electricity export prices for the day ahead are published.

This trigger fires when the electric current of the selected device goes above or below threshold.

Use this trigger to fire something when electricity export price for each half hour period for the day ahead is published.

This trigger fires when your light is turned on or off.

This trigger fires when your light brightness goes above or below.

This trigger fires when the fan or the light of your FanLight is turned on or off

This trigger fires when an alarm of your RF Bridge is activated.

This Trigger fires every time the camera detects a motion event.

This trigger fires when the water level of a diffuser is low.

This trigger fires when motion is detected or no motion is detected from Zigbee motion sensor.

This trigger fires when leak is detected from water leak sensor.

This trigger fires when the status of a Zigbee door sensor is open or closed.

This trigger fires when Zigbee Wireless Switch is pressed, double pressed, or long pressed.

This trigger fires when the selected electric curtain is open or closed.

This trigger fires when the child lock status changes (enabled/disabled).

This trigger fires when the thermostat mode changes.

This trigger fires when the thermostat turns on or off

This trigger fires when your light’s color temperature of light apperances warm or cool white.

This trigger fires when your lights to a specified colour .

This Trigger fires every time your eWeLink Scene Controller is pressed.

This Trigger fires every time your eWeLink Button is pressed.

This Trigger fires when the device/group is turn on or off

This query returns a list of daily published energy prices/

This query returns the on/off state of the device you choose.

This query returns a list of alerts when your electricity price crossed your set threshold between your preferred time settings. Note: this query will only return future events after this Applet is created.

Use this query to fire something when your electricity export price fell or rose past your set threshold and between your preferred time settings. Note: this query will only return future events after this Applet is created.

This query returns a list of when you have exported a set amount of electricity (measured in kWh) in a period.

This query returns a list of when energy price was at the lowest and for a set duration (such as an hour) and between your preferred time settings.

This query returns a list of when energy price threshold changes for set duration. Note: this query will only return future events after this Applet is created.

This query returns a list of when electricity price for each half hour period for the day was published.

This query returns a list of when carbon intensity fell or rose past your set threshold and between your preferred time settings. Note: this query will only return future events after this Applet is created.

This action will turn your eWeLink Support 4-Channel Plug on or off.

This action will turn your eWeLink Support 3-Channel Plug on or off.

This action will turn your eWeLink 2-Channel Plug on or off.

This action will turn your eWeLink Support 1-Channel Plug on or off.

This action will turn your eWeLink 4-Channel Switch on or off.

This action will turn your eWeLink Support 3-Channel Switch on or off.

This action will turn your eWeLink Support 2-Channel Switch on or off.

This action will turn your eWeLink Support 1-Channel Switch on or off.

This action will turn your eWeLink Support smart dimmer on or off.

This action will set brightness for selected eWeLink Support smart dimmer .

This action will set a color for selected light.

This action will set a color temperature for selected light.

This action will set the brightness for selected light .

This action will turn your light on or off.

This action will press selected remote button on your RF Bridge.

This action will turn on or turn off the fan or the light of your fanlight.

This action will open or close your electric curtain.

This action will turn your diffuser on or off.

This action will open selected curtain to the percentage you set.

This action will enable or disable the child lock.

This action will change the thermostat mode (Manual/Program).

This action will turn your eWeLink Thermostat on or off.

This action will set the light on/off or the fan speed of fanlight.

This Action will makes the camera sound an alarm.

This action will set to a target temperature

This action will turn your device/group turn on or off