This trigger fires when the specified device/group is turned on.

This Trigger fires if the concentration of Carbon Dioxide (CO₂) measured from your Huma-i device rises above the specified threshold, which is the average for 5 minutes.

This trigger fires when the specified device/group is turned off.

This Trigger fires if VOC (Volatile Organic Compounds) level measured from your Huma-i device rises above the specified threshold, which is the average for 5 minutes.

This trigger fires when user unlocking the lock, his password or fingerprint identification or card is confirmed.

This Trigger fires if the level of PM2.5 concentration measured from your Huma-i device rises above the specified threshold, which is the average for 5 minutes.

This trigger fires when the specified camera detects motion. To use this trigger, camera’s motion detection should be turned on.

This trigger fires when your Huma-i device data update.

This trigger fires when the specified camera detects sound. To use this trigger, camera’s sound detection should be turned on.

This Trigger fires if the AQI measured from your Huma-i device rises above the specified threshold, which is the average for 5 minutes.

This trigger fires when someone input incorrect password repetitiously.

This Trigger fires when the temperature measured from your Huma-i device rises above the threshold you specified.

This trigger fires when residual electricity in the lock under threshold.

This Trigger fires when the temperature measured from your Huma-i drops below the threshold you specified.

This trigger fires when the door sensor is open.

This Trigger fires when the humidity measured from your Huma-i device rises above the threshold you specified.

This trigger fires when the door sensor is closed.

This Trigger fires when the humidity measured from your Huma-i device dropped below the specified threshold, which is the average for 5 minutes.

This trigger fires when PIR detects person.

This trigger fires when water leak detected.

This trigger fires when water sound and light detected.

This trigger fires when sensor shake detected

This query returns a list of times when the sensor detected a water leak.

This query returns a list of times when the door sensor was closed.

This query returns a list of times when the door sensor was open.

This query returns a list of when PIR detected person.

This query returns a list of times when the specified device/group was turned off.

This query returns a list of when the specified device/group was turned on.

This query returns a list of times when someone input an incorrect password repetitiously.

This query returns a list of when a Camera detected motion. To use this query, Camera motion detected should be turned on.

This query returns a list of times when the specified camera detected sound. To use this query, camera’s sound detection must have been turned on.

This query returns a list of when sensor detected a shake

This query returns a list of when a user unloocked the lock and his password, fingerprint identification, or card was confirmed.

This query returns a list of when water sound or light were detected.

This query returns a list of when residual electricity in the lock dropped below the threshold. Note: this query will only return future events after this Applet is created.

This action will turn on the device/group of your choosing.

This action will turn off the device/group of your choosing.

This action will activate the specified scene.

This action will set your light to a specified brightness.

This action will set the light to specified color.

This action will set your AC to Cool Mode.

This action will set your AC to Heat Mode.

This action will set your AC to a specified temperature by remote controller.

This action will turn on the oscillation function of your fan by IR remote controller.

This action will turn off the oscillation function of your fan by IR remote controller.