Automatically Turn On Air Purifier When Air Quality is Unhealthy
Start today
Triggers (If this)
Queries (With)
Actions (Then that)
Other popular Air Monitor workflows and automations
-
-
-
Activate Smart Life Scene When Humidity is Too High
-
-
Set Smart Lights to Red When Air Quality is Very Unhealthy
-
-
Log Air Quality Data to Google Sheets for Tracking Trends
-
-
Turn on my air purifier when Air Monitor detect poor air quality
-
-
Toggle my Philips Hue by pressing Air monitor button
-
-
If PM2.5 for last 5 minutes is more than 15.5ppm measured from Air Monitor , turn on Kasa smart plug
-
-
Send an Email Summary of Daily Air Quality Readings
-
-
Switch Air Purifier to Auto Mode When Air Quality is Good
-
Useful Air Monitor and Smart Life integrations
Triggers (If this)
-
Device or group is turned on
This trigger fires when the specified device/group is turned on.
-
Button pressed
This trigger fires when the button on Air Monitor is pressed briefly.
-
Device or group is turned off
This trigger fires when the specified device/group is turned off.
-
New air quality reading
This trigger fires when a new air quality is reading available.
-
Unlock the lock
This trigger fires when user unlocking the lock, his password or fingerprint identification or card is confirmed.
-
High temperature
This trigger fires when the temperature measured from your Air Monitor rises above your threshold setting.
-
Camera detects motion
This trigger fires when the specified camera detects motion. To use this trigger, camera’s motion detection should be turned on.
-
Low temperature
This trigger fires when the temperature measured from your Air Monitor drops below your threshold setting.
-
Camera detects sound
This trigger fires when the specified camera detects sound. To use this trigger, camera’s sound detection should be turned on.
-
High humidity
This trigger fires when the humidity measured from your Air Monitor rises above your threshold setting.
-
Input incorrect password repetitiously
This trigger fires when someone input incorrect password repetitiously.
-
Low humidity
This trigger fires when the humidity measured from your Air Monitor drops below your threshold setting.
-
Battery low
This trigger fires when residual electricity in the lock under threshold.
-
Air quality is good
This trigger fires when the air quality measured from your Air Monitor is good.
(Indoor Air Quality value drops below 50 or your threshold setting)
-
Door sensor is open
This trigger fires when the door sensor is open.
-
Air quality is unhealthy
This trigger fires when the air quality measured from your Air Monitor is unhealthy.
(Indoor Air Quality value rises higher than 150 or your threshold setting)
-
Door sensor is closed
This trigger fires when the door sensor is closed.
-
Air quality is very unhealthy
This trigger fires when the air quality measured from your Air Monitor is very unhealthy.
(Indoor Air Quality value rises higher than 200 or your threshold setting)
-
Person is detected
This trigger fires when PIR detects person.
-
Leak detected
This trigger fires when water leak detected.
-
Sound and light detected
This trigger fires when water sound and light detected.
-
Shake detected
This trigger fires when sensor shake detected
Device or group is turned on
This trigger fires when the specified device/group is turned on.
Button pressed
This trigger fires when the button on Air Monitor is pressed briefly.
Device or group is turned off
This trigger fires when the specified device/group is turned off.
New air quality reading
This trigger fires when a new air quality is reading available.
Unlock the lock
This trigger fires when user unlocking the lock, his password or fingerprint identification or card is confirmed.
High temperature
This trigger fires when the temperature measured from your Air Monitor rises above your threshold setting.
Camera detects motion
This trigger fires when the specified camera detects motion. To use this trigger, camera’s motion detection should be turned on.
Low temperature
This trigger fires when the temperature measured from your Air Monitor drops below your threshold setting.
Camera detects sound
This trigger fires when the specified camera detects sound. To use this trigger, camera’s sound detection should be turned on.
High humidity
This trigger fires when the humidity measured from your Air Monitor rises above your threshold setting.
Input incorrect password repetitiously
This trigger fires when someone input incorrect password repetitiously.
Low humidity
This trigger fires when the humidity measured from your Air Monitor drops below your threshold setting.
Battery low
This trigger fires when residual electricity in the lock under threshold.
Air quality is good
This trigger fires when the air quality measured from your Air Monitor is good.
(Indoor Air Quality value drops below 50 or your threshold setting)
Door sensor is open
This trigger fires when the door sensor is open.
Air quality is unhealthy
This trigger fires when the air quality measured from your Air Monitor is unhealthy.
(Indoor Air Quality value rises higher than 150 or your threshold setting)
Door sensor is closed
This trigger fires when the door sensor is closed.
Air quality is very unhealthy
This trigger fires when the air quality measured from your Air Monitor is very unhealthy.
(Indoor Air Quality value rises higher than 200 or your threshold setting)
Person is detected
This trigger fires when PIR detects person.
Leak detected
This trigger fires when water leak detected.
Sound and light detected
This trigger fires when water sound and light detected.
Shake detected
This trigger fires when sensor shake detected
Queries (With)
-
History of Leak detected
This query returns a list of times when the sensor detected a water leak.
-
History of when humidity rose above a threshold
This query returns a list of when the humidity measured from your Air Monitor rises above your threshold setting. Note: this query will only return future events after this Applet is created.
-
History of when Door sensor was closed
This query returns a list of times when the door sensor was closed.
-
History of when temperature rose above a threshold
This query returns a list of when the temperature measured from your Air Monitor rose above your threshold setting. Note: this query will only return future events after this Applet is created.
-
History of when Door sensor was open
This query returns a list of times when the door sensor was open.
-
History of instances when air quality was good
This query returns a list of instances when the air quality measured from your Air Monitor was good. (Indoor Air Quality value drops below 50 or your threshold setting) Note: this query will only return future events after this Applet is created.
-
History of when a Person was detected
This query returns a list of when PIR detected person.
-
History of air quality readings
This query returns a list of when a new air quality is reading available.
-
History of Device turned off
This query returns a list of times when the specified device/group was turned off.
-
History of Device was turned on
This query returns a list of when the specified device/group was turned on.
-
History of repetitious incorrect password alerts
This query returns a list of times when someone input an incorrect password repetitiously.
-
History of motion detections by Camera
This query returns a list of when a Camera detected motion. To use this query, Camera motion detected should be turned on.
-
History of Camera detected sound
This query returns a list of times when the specified camera detected sound. To use this query, camera’s sound detection must have been turned on.
-
History of Shake detected
This query returns a list of when sensor detected a shake
-
History of when lock unlocked
This query returns a list of when a user unloocked the lock and his password, fingerprint identification, or card was confirmed.
-
History of Sound or Light Detected
This query returns a list of when water sound or light were detected.
-
History of low Battery alerts
This query returns a list of when residual electricity in the lock dropped below the threshold. Note: this query will only return future events after this Applet is created.
History of Leak detected
This query returns a list of times when the sensor detected a water leak.
History of when humidity rose above a threshold
This query returns a list of when the humidity measured from your Air Monitor rises above your threshold setting. Note: this query will only return future events after this Applet is created.
History of when Door sensor was closed
This query returns a list of times when the door sensor was closed.
History of when temperature rose above a threshold
This query returns a list of when the temperature measured from your Air Monitor rose above your threshold setting. Note: this query will only return future events after this Applet is created.
History of when Door sensor was open
This query returns a list of times when the door sensor was open.
History of instances when air quality was good
This query returns a list of instances when the air quality measured from your Air Monitor was good. (Indoor Air Quality value drops below 50 or your threshold setting) Note: this query will only return future events after this Applet is created.
History of when a Person was detected
This query returns a list of when PIR detected person.
History of air quality readings
This query returns a list of when a new air quality is reading available.
History of Device turned off
This query returns a list of times when the specified device/group was turned off.
History of Device was turned on
This query returns a list of when the specified device/group was turned on.
History of repetitious incorrect password alerts
This query returns a list of times when someone input an incorrect password repetitiously.
History of motion detections by Camera
This query returns a list of when a Camera detected motion. To use this query, Camera motion detected should be turned on.
History of Camera detected sound
This query returns a list of times when the specified camera detected sound. To use this query, camera’s sound detection must have been turned on.
History of Shake detected
This query returns a list of when sensor detected a shake
History of when lock unlocked
This query returns a list of when a user unloocked the lock and his password, fingerprint identification, or card was confirmed.
History of Sound or Light Detected
This query returns a list of when water sound or light were detected.
History of low Battery alerts
This query returns a list of when residual electricity in the lock dropped below the threshold. Note: this query will only return future events after this Applet is created.
Actions (Then that)
-
Turn on
This action will turn on the device/group of your choosing.
-
Turn off
This action will turn off the device/group of your choosing.
-
Activate Scene
This action will activate the specified scene.
-
Set light brightness
This action will set your light to a specified brightness.
-
Set light color
This action will set the light to specified color.
-
Start Cool Mode
This action will set your AC to Cool Mode.
-
Start Heat Mode
This action will set your AC to Heat Mode.
-
Set AC temperature
This action will set your AC to a specified temperature by remote controller.
-
Turn on oscillation function of fan
This action will turn on the oscillation function of your fan by IR remote controller.
-
Turn off oscillation function of fan
This action will turn off the oscillation function of your fan by IR remote controller.
Turn on
This action will turn on the device/group of your choosing.
Turn off
This action will turn off the device/group of your choosing.
Activate Scene
This action will activate the specified scene.
Set light brightness
This action will set your light to a specified brightness.
Set light color
This action will set the light to specified color.
Start Cool Mode
This action will set your AC to Cool Mode.
Start Heat Mode
This action will set your AC to Heat Mode.
Set AC temperature
This action will set your AC to a specified temperature by remote controller.
Turn on oscillation function of fan
This action will turn on the oscillation function of your fan by IR remote controller.
Turn off oscillation function of fan
This action will turn off the oscillation function of your fan by IR remote controller.
Air Monitor and Smart Life resources
How to use and set up a Tempest Weather Station
Click to learn how to set up a Tempest Weather Station!
Here are the most reliable home security devices for 2025
Your home is your safe space, and it should stay that way. Create more security for the most important people and belongings in your life with smart systems that protect everything. We are higlighting a few of the dozens of options avail...
Gift guide: For the new home owner 2024
Gifting your friends or family smart devices gives them the ability to customize their home to meet their lifestyle as well as opportunities to optimize their place for eco-efficiency. You may have a smart device or company that you have...
IFTTT helps all your apps and devices work better together