Connect SwitchBot to Weather Underground and unlock powerful automations

SwitchBotハブ２のタッチボタンを押すことをトリガー条件として設定することが可能です。例えば：ハブ２の左ボタンを押すと、SwitchBotスマート電球をオンにします。

This Trigger retrieves today's current weather report within 5 minutes of the time you specify. NOTE: Pollen count available only in the USA.

This trigger fires when one of the touch buttons of your Hub 2 is pressed. E.g. when the left touch button is pressed, turn on SwitchBot Color Bulb.

This Trigger retrieves tomorrow's weather report within 5 minutes of the time you specify, depending on when forecast data is updated.

プラグミニの状態をアクション実行条件として設定できます

This Trigger monitors your local temperature and fires whenever the temperature drops below the value you provide.

水漏れセンサーの水漏れ/水位低下状態をトリガー条件として設定することが可能です。

This Trigger monitors your local temperature and fires whenever the temperature rises above the value you provide.

You can choose Plug Mini's behaviour as a trigger condition

This Trigger monitors changes in the current weather condition. When one of those conditions is met the Trigger fires. Currently only these simple conditions are supported: Rain, Snow, Cloudy, Clear.

Whenever a preset carbon dioxide change detected, SwitchBot meter pro will try to trigger the service. E.g. if the carbon dioxide is too high, turn on SwitchBot air purifier.

This Trigger fires every time tomorrow’s forecasted low temperature drops below a value you provide.

このトリガーはロボットの状態が変更した時に実行します

This Trigger fires every time tomorrow’s forecasted high temperature rises above a value you provide.

You can use the Water Detector state as a condition to trigger an automation.

This Trigger monitors changes in tomorrow’s forecasted weather condition.

温度・湿度の変化を検出された時、SwitchBot温湿度計（メーター）が「THAT」サービスをトリガーにします。例えば、温度が27度より高い時、SwitchBot Hub PlusでエアコンをONにします。

This Trigger fires within 15 minutes of the sunrise in your location.

This trigger fires when the status of your SwitchBot Robot Vacuum Cleaner changed

This Trigger fires within 15 minutes of the sunset in your location.

Whenever a preset temperature and/or humidity change detected, SwitchBot Thermometer & Hygrometer (the Meter) will try to trigger the service. E.g. if the temperature is too high, turn on AC with the SwitchBot Hub Plus (the Hub Plus).

This Trigger fires every time the wind speed rises above a value you specify in your location.

動体検知の結果によって、SwitchBot人感センサーがサービスをトリガーします。

This Trigger monitors your local pollen levels and fires every time the pollen count rises above the value you specify (1-12). NOTE: Available only in the USA.

When Motion Sensor detected motion or no motion, the SwitchBot motion sensor will try to trigger the service.

This Trigger monitors your local humidity and fires every time the humidity rises above the value you specify.

開閉状態の検知結果によって、SwitchBot開閉センサーがサービスをトリガーします。

This Trigger monitors your local UV levels and fires every time the UV index rises above the value you specify (0-16).

When Contact Sensor detected door/window opened or closed or left open, the SwitchBot contact sensor will try to trigger the service.

このトリガーはロックの状態が変更した時に実行する

This trigger fires when the status of your SwitchBot Lock is changed.

Get the current weather

Two day forecast

This query monitors your local humidity and returns a list of times when the humidity rose above the value you specified. Note: this query will only return future events after this Applet is created.

This query returns a list of times when the wind speed rose above a value you specify in your location. Note: this query will only return future events after this Applet is created.

This query monitors your local pollen levels and returns a list of times when the pollen count rose above the value you specified (1-12). NOTE: Available only in the USA. Note: this query will only return future events after this Applet is created.

This query returns a list of times when tomorrows forecasted high temperature rose above a value you provided. Note: this query will only return future events after this Applet is created.

This query returns a list of alerts when tomorrows forecasted low temperature dropped below a value you provided. Note: this query will only return future events after this Applet is created.

This query monitors your local temperature and returns a list of times when the temperature rose above the value you provided. Note: this query will only return future events after this Applet is created.

This query monitors your local temperature and returns a list of times when the temperature dropped below the value you provide. Note: this query will only return future events after this Applet is created.

This query monitors your local UV levels and returns a list of times when the UV index rose above the value you specified (0-16). Note: this query will only return future events after this Applet is created.

This query returns a history of sunrises in your location. Note: this query will only return future events after this Applet is created.

This query returns a history of sunsets at your location.

This query returns a list of times when the observed weather changed to meet a specific condition (Rain, Snow, Cloudy, or Clear).

This query returns a list of times when the forecasted weather changed to meet a specific condition (Rain, Snow, Cloudy, or Clear).

This action will trigger the specified Bot to turn off the switch.

This action will trigger the specified Bot to press the switch.

This action will trigger the specified Bot to turn on the switch.

This action will ask SwitchBot Hub Plus to turn off your paired air conditioner.

This action will ask SwitchBot Hub Plus to turn on or set your paired air conditioner with predefined mode, temperature and fan speed.

This action will ask SwitchBot Hub Plus to turn on your paired appliance with the IR remote feature.

This action will ask SwitchBot Hub Plus to turn off your paired appliance with the IR remote feature.

This action will turn on your Plug.

This action will turn off your Plug.

This action will ask SwitchBot Hub Plus to send an infrared signal to control TV.

This action will ask SwitchBot Hub Plus to send an infrared signal to control any "Others" types of appliances set in the SwitchBot App. Note: Please use other actions if your appliance type is known to the App for a better experience

4つの送風モードを切り替えます。

This Action will control the SwitchBot Smart Fan.

You can switch between 4 blowing modes.

You can set the nightlight status of your Air Circulator Fan.

常夜灯の明るさを調整できます。

You can set the Horizontal Oscillation to turn on or turn off.

首振りモードを設定できます。

You can set the Vertical Oscillation to turn on or turn off.

上下の首振りモードを設定できます。

You can set the fan speed.

風量を調整できます。

このアクションはSwitchBotスマート扇風機を操作できます。

This Action will control the SwitchBot Smart Humidifier.

This Action will control the SwitchBot Evaporative Humidifier.

このアクションは、SwitchBotスマート気化式加湿器を制御します。

このアクションは、SwitchBotスマート加湿器を制御します。

Run the Scene you previously set in the SwitchBot App. Only manual execution types are allowed.

SwitchBot アプリで作成したシーンを実行します。（ご注意：手動実行するシーンのみ）

This Action will control the SwitchBot Curtain.

このアクションは、SwitchBotカーテンを制御します。

You can set the on/off state of your Color Bulb here.

本ページで電球の状態を設定できます

You can set the brightness of your Color Bulb here.

本ページで電球の明るさを設定できます

You can set the color of your Color Bulb here.

本ページで電球のカラーを設定できます

You can set the color temperature of your Color bulb here.

本ページで電球のカラーを設定できます

You can set the presets saved in your SwitchBot app here.

本ページでSwitchBotアプリに保存されたプリセットを設定できます

The robot will start vacuuming

ロボットは清掃を開始します

The robot will pause vacuuming (pause recharging)

ロボットは清掃/再充電を一時停止します

ロボットは充電に帰還します

The robot will start recharging

The robot will switch mode

ロボットは吸引力のモードを切り替えます

You can set your Ceiling Light to be turned on/off.

シーリングライトのオン/オフを設定できます

トグルシーリングライト（オン/オフ）

Toggle Ceiling Light On/Off

シーリングライトの色温度を設定できます

You can set the color temperature of your Ceiling Light here.

You can set the brightness of your Ceiling Light here.

シーリングライトの明るさを設定できます

This action will open/close Blind Tilt up or down and to a specific percentage.

ブラインドポールを特定の位置まで開ける/閉めるに設定可能です。

This Action will control the SwitchBot Air Purifier.

This Action will control the SwitchBot RollerShade.

Change water output for mopping

水拭きの水量を変更

The platform will purity in situ

The platform will purity whole house

The platform will cruise whole house

The platform will back to base station

原位置除染を開始する

家全体の浄化を始める

ハウスツアーを開始する

基地局への復帰を開始する

You can set the on/off state of your Strip Light here.

本ページでテープライトの状態を設定できます

You can set the color of Strip Light on this page.

本ページでテープライトのカラーを設定できます

You can set the Plug Mini's action

You can set the Plug Mini's action

You can set the Plug Mini's action

プラグミニの実行アクションを設定できます

プラグミニの実行アクションを設定できます

プラグミニの実行アクションを設定できます