Turn your lights on when you arrive home
Start today
Triggers (If this)
Queries (With)
Actions (Then that)
Other popular mydlink workflows and automations
-
10
-
-
Send a text when your D-Link water sensor detects a leak warning
29
-
-
Webcam detects motion then LED on and unmute my Optoma projector
-
-
Receive a notification if your D-Link camera detects a sound
62
-
-
Alert and ask for verification if D-Link camera detects unusual motion
-
-
If detects a motion event, then Send message Telegram to Private chat with @IFTTT
-
-
Turn off mydlink Salt system after 30 minutes
-
-
Receive a text notification if motion is detected
45
-
-
DLink Water Sensor trigger FL-1000 Close Valve and Leak Alarm
-
Useful mydlink and Smart Life integrations
Triggers (If this)
-
Device or group is turned on
This trigger fires when the specified device/group is turned on.
-
Person is detected
This trigger fires every time your D-Link device detects a person.
-
Device or group is turned off
This trigger fires when the specified device/group is turned off.
-
T3/T4 alarm is detected
This trigger fires every time your D-Link device detects a T3/T4 alarm.
-
Unlock the lock
This trigger fires when user unlocking the lock, his password or fingerprint identification or card is confirmed.
-
Motion is detected
This trigger fires every time your D-Link device detects a motion event.
-
Camera detects motion
This trigger fires when the specified camera detects motion. To use this trigger, camera’s motion detection should be turned on.
-
Vehicle is detected
This trigger fires every time your D-Link device detects a vehicle.
-
Camera detects sound
This trigger fires when the specified camera detects sound. To use this trigger, camera’s sound detection should be turned on.
-
Contact close is detected
This trigger fires every time your D-Link device detects a contact close event.
-
Input incorrect password repetitiously
This trigger fires when someone input incorrect password repetitiously.
-
Contact open is detected
This trigger fires every time your D-Link device detects a contact open event.
-
Battery low
This trigger fires when residual electricity in the lock under threshold.
-
Sound is detected
This trigger fires every time your D-Link camera detects a sound event.
-
Door sensor is open
This trigger fires when the door sensor is open.
-
Water is detected
This trigger fires every time your D-Link water sensor detects a leak event.
-
Door sensor is closed
This trigger fires when the door sensor is closed.
-
Water is no longer detected
This trigger fires when your D-Link water sensor no longer detects water.
-
Person is detected
This trigger fires when PIR detects person.
-
Camera is turned on
This tigger fires every time your D-Link camera is turned on.
-
Leak detected
This trigger fires when water leak detected.
-
Plug is turned on
This tigger fires every time your D-Link smart plug is turned on.
-
Sound and light detected
This trigger fires when water sound and light detected.
-
Camera is turned off
This tigger fires every time your D-Link camera is turned off.
-
Shake detected
This trigger fires when sensor shake detected
-
Plug is turned off
This tigger fires every time your D-Link smart plug is turned off.
Device or group is turned on
This trigger fires when the specified device/group is turned on.
Person is detected
This trigger fires every time your D-Link device detects a person.
Device or group is turned off
This trigger fires when the specified device/group is turned off.
T3/T4 alarm is detected
This trigger fires every time your D-Link device detects a T3/T4 alarm.
Unlock the lock
This trigger fires when user unlocking the lock, his password or fingerprint identification or card is confirmed.
Motion is detected
This trigger fires every time your D-Link device detects a motion event.
Camera detects motion
This trigger fires when the specified camera detects motion. To use this trigger, camera’s motion detection should be turned on.
Vehicle is detected
This trigger fires every time your D-Link device detects a vehicle.
Camera detects sound
This trigger fires when the specified camera detects sound. To use this trigger, camera’s sound detection should be turned on.
Contact close is detected
This trigger fires every time your D-Link device detects a contact close event.
Input incorrect password repetitiously
This trigger fires when someone input incorrect password repetitiously.
Contact open is detected
This trigger fires every time your D-Link device detects a contact open event.
Battery low
This trigger fires when residual electricity in the lock under threshold.
Sound is detected
This trigger fires every time your D-Link camera detects a sound event.
Door sensor is open
This trigger fires when the door sensor is open.
Water is detected
This trigger fires every time your D-Link water sensor detects a leak event.
Door sensor is closed
This trigger fires when the door sensor is closed.
Water is no longer detected
This trigger fires when your D-Link water sensor no longer detects water.
Person is detected
This trigger fires when PIR detects person.
Camera is turned on
This tigger fires every time your D-Link camera is turned on.
Leak detected
This trigger fires when water leak detected.
Plug is turned on
This tigger fires every time your D-Link smart plug is turned on.
Sound and light detected
This trigger fires when water sound and light detected.
Camera is turned off
This tigger fires every time your D-Link camera is turned off.
Shake detected
This trigger fires when sensor shake detected
Plug is turned off
This tigger fires every time your D-Link smart plug is turned off.
Queries (With)
-
History of Leak detected
This query returns a list of times when the sensor detected a water leak.
-
History of Motion is detected
This query returns a list of times when your D-Link device detected a motion event.
-
History of when Door sensor was closed
This query returns a list of times when the door sensor was closed.
-
History of when Water was no longer detected
This query returns a list of when your D-Link water sensor no longer detected water.
-
History of when Door sensor was open
This query returns a list of times when the door sensor was open.
-
History of sound is detected
This query returns a list of when your D-Link camera detects a sound event.
-
History of when a Person was detected
This query returns a list of when PIR detected person.
-
History of Device turned off
This query returns a list of times when the specified device/group was turned off.
-
History of Device was turned on
This query returns a list of when the specified device/group was turned on.
-
History of repetitious incorrect password alerts
This query returns a list of times when someone input an incorrect password repetitiously.
-
History of motion detections by Camera
This query returns a list of when a Camera detected motion. To use this query, Camera motion detected should be turned on.
-
History of Camera detected sound
This query returns a list of times when the specified camera detected sound. To use this query, camera’s sound detection must have been turned on.
-
History of Shake detected
This query returns a list of when sensor detected a shake
-
History of when lock unlocked
This query returns a list of when a user unloocked the lock and his password, fingerprint identification, or card was confirmed.
-
History of Sound or Light Detected
This query returns a list of when water sound or light were detected.
-
History of low Battery alerts
This query returns a list of when residual electricity in the lock dropped below the threshold. Note: this query will only return future events after this Applet is created.
History of Leak detected
This query returns a list of times when the sensor detected a water leak.
History of Motion is detected
This query returns a list of times when your D-Link device detected a motion event.
History of when Door sensor was closed
This query returns a list of times when the door sensor was closed.
History of when Water was no longer detected
This query returns a list of when your D-Link water sensor no longer detected water.
History of when Door sensor was open
This query returns a list of times when the door sensor was open.
History of sound is detected
This query returns a list of when your D-Link camera detects a sound event.
History of when a Person was detected
This query returns a list of when PIR detected person.
History of Device turned off
This query returns a list of times when the specified device/group was turned off.
History of Device was turned on
This query returns a list of when the specified device/group was turned on.
History of repetitious incorrect password alerts
This query returns a list of times when someone input an incorrect password repetitiously.
History of motion detections by Camera
This query returns a list of when a Camera detected motion. To use this query, Camera motion detected should be turned on.
History of Camera detected sound
This query returns a list of times when the specified camera detected sound. To use this query, camera’s sound detection must have been turned on.
History of Shake detected
This query returns a list of when sensor detected a shake
History of when lock unlocked
This query returns a list of when a user unloocked the lock and his password, fingerprint identification, or card was confirmed.
History of Sound or Light Detected
This query returns a list of when water sound or light were detected.
History of low Battery alerts
This query returns a list of when residual electricity in the lock dropped below the threshold. Note: this query will only return future events after this Applet is created.
Actions (Then that)
-
Turn on
This action will turn on the device/group of your choosing.
-
Change scene
This action will change your scene.
-
Turn off
This action will turn off the device/group of your choosing.
-
Turn on plug
This action will turn on your D-Link smart plug.
-
Activate Scene
This action will activate the specified scene.
-
Turn on camera
This action will turn on your D-Link camera.
-
Set light brightness
This action will set your light to a specified brightness.
-
Turn off camera
This action will turn off your D-Link camera.
-
Set light color
This action will set the light to specified color.
-
Turn off plug
This action will turn off your D-Link smart plug.
-
Start Cool Mode
This action will set your AC to Cool Mode.
-
Start Heat Mode
This action will set your AC to Heat Mode.
-
Set AC temperature
This action will set your AC to a specified temperature by remote controller.
-
Turn on oscillation function of fan
This action will turn on the oscillation function of your fan by IR remote controller.
-
Turn off oscillation function of fan
This action will turn off the oscillation function of your fan by IR remote controller.
Turn on
This action will turn on the device/group of your choosing.
Change scene
This action will change your scene.
Turn off
This action will turn off the device/group of your choosing.
Turn on plug
This action will turn on your D-Link smart plug.
Activate Scene
This action will activate the specified scene.
Turn on camera
This action will turn on your D-Link camera.
Set light brightness
This action will set your light to a specified brightness.
Turn off camera
This action will turn off your D-Link camera.
Set light color
This action will set the light to specified color.
Turn off plug
This action will turn off your D-Link smart plug.
Start Cool Mode
This action will set your AC to Cool Mode.
Start Heat Mode
This action will set your AC to Heat Mode.
Set AC temperature
This action will set your AC to a specified temperature by remote controller.
Turn on oscillation function of fan
This action will turn on the oscillation function of your fan by IR remote controller.
Turn off oscillation function of fan
This action will turn off the oscillation function of your fan by IR remote controller.
IFTTT helps all your apps and devices work better together