Automatically turn on A/C if the temperature gets too hot
Start today
Popular Honeywell Home and Weather Underground workflows and automations
Useful Honeywell Home and Weather Underground integrations
Triggers (If this)
- Today's weather reportThis Trigger retrieves today's current weather report within 5 minutes of the time you specify. NOTE: Pollen count available only in the USA.
- Camera sound detectedThis trigger fires when the system detects a sound camera event.
- Tomorrow's weather reportThis Trigger retrieves tomorrow's weather report within 5 minutes of the time you specify, depending on when forecast data is updated.
- Water leak detectedThis trigger fires when the system detects a water leak.
- Current temperature drops belowThis Trigger monitors your local temperature and fires whenever the temperature drops below the value you provide.
- Camera motion detectedThis trigger fires when the system detects a motion camera event.
- Current temperature rises aboveThis Trigger monitors your local temperature and fires whenever the temperature rises above the value you provide.
- Smart Home Security home mode activatedThis trigger fires when the home security device enters Home mode
- Current condition changes toThis Trigger monitors changes in the current weather condition. When one of those conditions is met the Trigger fires. Currently only these simple conditions are supported: Rain, Snow, Cloudy, Clear.
- Smart Home Security away mode activatedThis trigger fires when the home security device enters Away mode.
- Tomorrow's low drops belowThis Trigger fires every time tomorrow’s forecasted low temperature drops below a value you provide.
- Smart Home Security night mode activatedThis trigger fires when the home security device enters Night mode.
- Tomorrow's high rises aboveThis Trigger fires every time tomorrow’s forecasted high temperature rises above a value you provide.
- Smart Home Security off mode activatedThis trigger fires when the home security device enters Off mode.
- Tomorrow's forecast calls forThis Trigger monitors changes in tomorrow’s forecasted weather condition.
- Smart Home Security Alarm activatedThis trigger fires when the home security device alarm has been activated
- SunriseThis Trigger fires within 15 minutes of the sunrise in your location.
- Smart Home Security Outdoor Motion Viewer activatedThis trigger fires when a Honeywell Homes Outdoor Motion Viewer is activated.
- SunsetThis Trigger fires within 15 minutes of the sunset in your location.
- Wind speed rises aboveThis Trigger fires every time the wind speed rises above a value you specify in your location.
- Current pollen count rises aboveThis Trigger monitors your local pollen levels and fires every time the pollen count rises above the value you specify (1-12). NOTE: Available only in the USA.
- Current humidity level rises aboveThis Trigger monitors your local humidity and fires every time the humidity rises above the value you specify.
- Current UV index rises aboveThis Trigger monitors your local UV levels and fires every time the UV index rises above the value you specify (0-16).
Queries (With)
- Current weatherGet the current weather
- History of Smart Home Security night mode activationsThis query returns a list of when the home security device entered Night mode.
- Two day forecastTwo day forecast
- History of Smart Home Security Outdoor Motion Viewer activationsThis query returns a list of when a Honeywell Homes Outdoor Motion Viewer was activated.
- History of humidity level rose above thresholdThis query monitors your local humidity and returns a list of times when the humidity rose above the value you specified. Note: this query will only return future events after this Applet is created.
- History of Smart Home Security away mode activatedThis query returns a list of when the home security device enters Away mode.
- History of Wind speed rose above thresholdThis query returns a list of times when the wind speed rose above a value you specify in your location. Note: this query will only return future events after this Applet is created.
- History of Smart Home Security home mode being activatedThis query returns a list of when the home security device entered Home mode.
- History of pollen count rose above thresholdThis query monitors your local pollen levels and returns a list of times when the pollen count rose above the value you specified (1-12). NOTE: Available only in the USA. Note: this query will only return future events after this Applet is created.
- History of Camera motion detectedThis query returns a list of when the system detected a motion camera event.
- History of Tomorrow's Forecast was above threshold alertsThis query returns a list of times when tomorrows forecasted high temperature rose above a value you provided. Note: this query will only return future events after this Applet is created.
- History of Tomorrow's Forecast drops below alertsThis query returns a list of alerts when tomorrows forecasted low temperature dropped below a value you provided. Note: this query will only return future events after this Applet is created.
- History of temperatre rose above thresholdThis query monitors your local temperature and returns a list of times when the temperature rose above the value you provided. Note: this query will only return future events after this Applet is created.
- History of temperature dropped below thresholdThis query monitors your local temperature and returns a list of times when the temperature dropped below the value you provide. Note: this query will only return future events after this Applet is created.
- History of UV index rose above thresholdThis query monitors your local UV levels and returns a list of times when the UV index rose above the value you specified (0-16). Note: this query will only return future events after this Applet is created.
- History of SunrisesThis query returns a history of sunrises in your location. Note: this query will only return future events after this Applet is created.
- History of SunsetsThis query returns a history of sunsets at your location.
- History of specified weather conditionsThis query returns a list of times when the observed weather changed to meet a specific condition (Rain, Snow, Cloudy, or Clear).
- History of specified forecast conditionsThis query returns a list of times when the forecasted weather changed to meet a specific condition (Rain, Snow, Cloudy, or Clear).
Actions (Then that)
- Set temperature to a permanent holdThis Action will set your Honeywell thermostat to permanently hold the specified temperature until you change it.
- Set fan to on, auto or circulateThis Action will set the Honeywell thermostat fan to On where the fan is always on or Auto where the fan runs only when the heating or cooling system is on.
- Arm my Honeywell Home Smart Home SecurityThis action will arm my Honeywell Home Smart Home Security in Night or Away Mode.
- Set thermostat room priorityThis action will let you select one of your sensors to prioritize, so that your T9 or T10 Smart Thermostat senses the temperature from that room.
- Control my Z-Wave light or outletThis action will set my Z-Wave light or outlet on or off, and control brightness (if available).
- Change my thermostat setpoint temperatureThis action will set a heat or cool setpoint temperature for my thermostat.
- Set thermostat room priority to active roomsThis will set your T9 or T10 Smart Thermostat room priority to ‘active.’ Active Rooms lets your thermostat detect motion in the rooms that people are in, using your smart room sensors.
IFTTT helps all your apps and devices work better together