Arriving Home - Lights On
Connect top workflows
Quickly and easily enable Applets using Heatmiser and Location.-
3
-
-
Adjust thermostat when you leave a specific location
11
-
-
When you enter a specific area set your Heatmiser Thermostat to __°
10
-
-
Arriving Home - Turn the Lights On
1
-
-
Geolocation (Set Temp Adjustment) - Time Dependant
5
-
-
When you enter a specific area set your Heatmiser Thermostat to __°
16
-
Build your own Heatmiser and Location automations
Triggers (If this)
-
Temperature rises above
This Trigger fires every time the temperature rises above a threshold you specify.
-
You enter an area
This Trigger fires every time you enter an area you specify.
-
Temperature drops below
This Trigger fires every time the temperature drops above a threshold you specify.
-
You exit an area
This Trigger fires every time you exit an area you specify.
-
neoHub Away Mode
This trigger fires when your neoHub is set to away mode.
-
You enter or exit an area
This Trigger fires every time you enter or exit an area you specify.
-
neoHub Home Mode
Triggers when your neoHub returns to Home Mode.
-
Low Battery
This trigger fires when your Heatmiser Device has a Low Battery.
-
Contact Sensor Closed
This trigger fires when the Contact Sensor is closed
-
Contact Sensor Open
This trigger fires when the Contact Sensor is opened
Temperature rises above
This Trigger fires every time the temperature rises above a threshold you specify.
You enter an area
This Trigger fires every time you enter an area you specify.
Temperature drops below
This Trigger fires every time the temperature drops above a threshold you specify.
You exit an area
This Trigger fires every time you exit an area you specify.
neoHub Away Mode
This trigger fires when your neoHub is set to away mode.
You enter or exit an area
This Trigger fires every time you enter or exit an area you specify.
neoHub Home Mode
Triggers when your neoHub returns to Home Mode.
Low Battery
This trigger fires when your Heatmiser Device has a Low Battery.
Contact Sensor Closed
This trigger fires when the Contact Sensor is closed
Contact Sensor Open
This trigger fires when the Contact Sensor is opened
Actions (Then that)
-
Cancel temperature hold
This Action will cancel a temperature hold on the selected Heatmiser Thermostat.
-
Set temperature hold
This Action will enable a temperature hold on the selected Heatmiser Thermostat.
-
Turn neoPlug on
This Action will allow you to switch on the selected neoPlug.
-
Turn neoPlug off
This Action will turn off the selected neoPlug.
-
Set Temperature
The Action will set the temperature on the selected Heatmiser Thermostat.
-
Boost Timer
This Action will activate a Timer Boost on the selected Heatmiser Timer.
-
Set Away Mode
This Action will activate Away Mode on your neoHub
-
Set Home Mode
The Action will activate Home Mode on your neoHub.
-
Set Standby Mode
This Action will activate Standby Mode on the selected Heatmiser Thermostat.
-
Cancel Standby Mode
This Action will cancel Standby Mode on the selected Heatmiser Thermostat.
-
Run Profile
This action will send a stored profile to the selected thermostat.
-
Run recipe
This action will run a Heatmiser Neo recipe.
Cancel temperature hold
This Action will cancel a temperature hold on the selected Heatmiser Thermostat.
Set temperature hold
This Action will enable a temperature hold on the selected Heatmiser Thermostat.
Turn neoPlug on
This Action will allow you to switch on the selected neoPlug.
Turn neoPlug off
This Action will turn off the selected neoPlug.
Set Temperature
The Action will set the temperature on the selected Heatmiser Thermostat.
Boost Timer
This Action will activate a Timer Boost on the selected Heatmiser Timer.
Set Away Mode
This Action will activate Away Mode on your neoHub
Set Home Mode
The Action will activate Home Mode on your neoHub.
Set Standby Mode
This Action will activate Standby Mode on the selected Heatmiser Thermostat.
Cancel Standby Mode
This Action will cancel Standby Mode on the selected Heatmiser Thermostat.
Run Profile
This action will send a stored profile to the selected thermostat.
Run recipe
This action will run a Heatmiser Neo recipe.
How to connect Heatmiser and Location
Find or create an Applet
Start by discovering an automation to connect or customizing your own. It's quick and easy.Connect IFTTT to your accounts
Securely connect your Heatmiser and Location accounts.Finalize and customize your Applet
Review your trigger and action settings. Your Applet is ready to go!Top integration tips, tools, and resources
IFTTT helps all your apps and devices work better together