Switch off a device when it's daylight
Start today
Popular Hager IoT and Weather Underground workflows and automations
Useful Hager IoT and Weather Underground integrations
Triggers (If this)
- Device switched onThis Trigger fires every time your device is switched on.
- Today's weather reportThis Trigger retrieves today's current weather report within 5 minutes of the time you specify. NOTE: Pollen count available only in the USA.
- Device switched offThis Trigger fires every time your device is switched off.
- Tomorrow's weather reportThis Trigger retrieves tomorrow's weather report within 5 minutes of the time you specify, depending on when forecast data is updated.
- Player state changesThis Trigger fires every time your device player's state changes to the value you specified.
- Current temperature drops belowThis Trigger monitors your local temperature and fires whenever the temperature drops below the value you provide.
- Brightness level rises aboveThis Trigger fires every time your device detects a brightness level above the value you specified.
- Current temperature rises aboveThis Trigger monitors your local temperature and fires whenever the temperature rises above the value you provide.
- Brightness level drops belowThis Trigger fires every time your device brightness level is below the value you specified.
- Current condition changes toThis Trigger monitors changes in the current weather condition. When one of those conditions is met the Trigger fires. Currently only these simple conditions are supported: Rain, Snow, Cloudy, Clear.
- Binary switch turns onThis Trigger fires every time your device's binary switch is turned on.
- Tomorrow's low drops belowThis Trigger fires every time tomorrow’s forecasted low temperature drops below a value you provide.
- Binary switch turns offThis Trigger fires every time your device's binary switch is turned off.
- Tomorrow's high rises aboveThis Trigger fires every time tomorrow’s forecasted high temperature rises above a value you provide.
- CO2 level rises aboveThis Trigger fires every time your device detects a CO2 level above the value you specified.
- Tomorrow's forecast calls forThis Trigger monitors changes in tomorrow’s forecasted weather condition.
- CO2 level drops belowThis Trigger fires every time your device detects a CO2 level below the value you specified.
- SunriseThis Trigger fires within 15 minutes of the sunrise in your location.
- Humidity level rises aboveThis Trigger fires every time your device detects humidity levels higher than the threshold you specified.
- SunsetThis Trigger fires within 15 minutes of the sunset in your location.
- Humidity level drops belowThis Trigger fires every time your device detects humidity levels lower than the threshold you specified.
- Wind speed rises aboveThis Trigger fires every time the wind speed rises above a value you specify in your location.
- Luminescence level rises aboveThis Trigger fires every time your device detects luminescence levels higher than the value you specified.
- Current pollen count rises aboveThis Trigger monitors your local pollen levels and fires every time the pollen count rises above the value you specify (1-12). NOTE: Available only in the USA.
- Luminescence level drops belowThis Trigger fires every time your device detects a luminescence level below the value you specified.
- Current humidity level rises aboveThis Trigger monitors your local humidity and fires every time the humidity rises above the value you specify.
- Rain indicator turns onThis Trigger fires every time your device's rain indicator turns on.
- Current UV index rises aboveThis Trigger monitors your local UV levels and fires every time the UV index rises above the value you specify (0-16).
- Rain indicator turns offThis Trigger fires every time your device's rain indicator turns off.
- Weather Station reports dayThis trigger fires when the Weather Station reports day.
- Weather Station reports nightThis trigger fires when the Weather Station reports night.
- Temperature rises aboveThis Trigger fires every time your device detects temperatures above the value you specified.
- Temperature drops belowThis Trigger fires every time your device detects a temperature below the value you specified.
- Volume level rises aboveThis Trigger fires every time your device detects a volume level above the value you specified.
- Volume level drops belowThis Trigger fires every time your device volume level is below the value you specified.
- Wind speed rises aboveThis Trigger fires every time your device detects wind speed higher than the value you specified.
- Wind speed drops belowThis Trigger fires every time your device detects wind speed lower than the value you specified.
- Battery belowThis Trigger fires every time your device's battery level falls below the value you specified.
- Alarm turns onThis Trigger fires every time your device's alarm is turned on.
- Alarm turns offThis Trigger fires every time your device's alarm is turned off.
Queries (With)
- Current weatherGet the current weather
- History of alarm turned onThis query returns a list of events when the alarm was turned on.
- Two day forecastTwo day forecast
- History of battery below specified valueThis query returns a list of recent times your battery fell below a specified value. Note: this query will only return future events after this Applet is created.
- History of humidity level rose above thresholdThis query monitors your local humidity and returns a list of times when the humidity rose above the value you specified. Note: this query will only return future events after this Applet is created.
- History of when wind speed dropped below a thresholdThis query returns a list of when your device detects wind speed lower than the value you specified. Note: this query will only return future events after this Applet is created.
- History of Wind speed rose above thresholdThis query returns a list of times when the wind speed rose above a value you specify in your location. Note: this query will only return future events after this Applet is created.
- History of Binary switch offsThis query returns a list of when your device's binary switch was turned off.
- History of pollen count rose above thresholdThis query monitors your local pollen levels and returns a list of times when the pollen count rose above the value you specified (1-12). NOTE: Available only in the USA. Note: this query will only return future events after this Applet is created.
- History of brightness level rises aboveThis query returns a list of when your device detects a brightness level above the value you specified. Note: this query will only return future events after this Applet is created.
- History of Tomorrow's Forecast was above threshold alertsThis query returns a list of times when tomorrows forecasted high temperature rose above a value you provided. Note: this query will only return future events after this Applet is created.
- History of alarm turns offThis query returns a list of when your device's alarm was turned off.
- History of Tomorrow's Forecast drops below alertsThis query returns a list of alerts when tomorrows forecasted low temperature dropped below a value you provided. Note: this query will only return future events after this Applet is created.
- History of player state changesThis query returns a list of when your device player's state changes to the value you specified.
- History of temperatre rose above thresholdThis query monitors your local temperature and returns a list of times when the temperature rose above the value you provided. Note: this query will only return future events after this Applet is created.
- History of volume level drops below a thresholdThis query returns a list of when your device volume level was below the value you specified. Note: this query will only return future events after this Applet is created.
- History of temperature dropped below thresholdThis query monitors your local temperature and returns a list of times when the temperature dropped below the value you provide. Note: this query will only return future events after this Applet is created.
- History of CO2 level rises above a thresholdThis query returns a list of when your device detected a CO2 level above the value you specified. Note: this query will only return future events after this Applet is created.
- History of UV index rose above thresholdThis query monitors your local UV levels and returns a list of times when the UV index rose above the value you specified (0-16). Note: this query will only return future events after this Applet is created.
- History of Weather Station reports nightThis query returns a list of when the Weather Station reports night.
- History of SunrisesThis query returns a history of sunrises in your location. Note: this query will only return future events after this Applet is created.
- History of brightness level dropping below specified valueThis query returns a list of when your device brightness level was below the value you specified. Note: this query will only return future events after this Applet is created.
- History of SunsetsThis query returns a history of sunsets at your location.
- Histor of wind speed risesThis query returns a list of instances when your device detected wind speed higher than the value you specified. Note: this query will only return future events after this Applet is created.
- History of specified weather conditionsThis query returns a list of times when the observed weather changed to meet a specific condition (Rain, Snow, Cloudy, or Clear).
- History of specified forecast conditionsThis query returns a list of times when the forecasted weather changed to meet a specific condition (Rain, Snow, Cloudy, or Clear).
Actions (Then that)
- Run sceneThis Action will run a scene.
- Switch onThis Action will turn on your devices that support switching on.
- Switch offThis Action will turn off your devices that support switching off.
- Set light levelThis Action will set level on your lighting devices that support dimming.
- Set volumeThis Action will set volume on your media player devices that support volume.
- Set player controlThis Action will control your media player devices.
- Set thermostat setpointThis action will change the thermostat setpoint.
- Run KNX sceneThis action will run a KNX scene.
- Change shutter/blinds positionThis action will change the shutter/blinds position.
- Set colorThis Action will change the color of your lights. NOTE: Accepts color names and CSS hex color values. Defaults to white if no color match is found.
- Play playlistThis action will play a playlist.
- Play favoriteThis action will play an item from the favorites.
IFTTT helps all your apps and devices work better together