WeatherFlow rain detection. Park until next scheduled start
Other popular Husqvarna Automower® workflows and automations
-
-
Park Husqvarna Automower when KNX weather station reports rain
-
Park mower with a Google Calendar event
-
automatic starting after parking at frost (automatic starting after "Frostsensor")
-
Cut the lawn when you leave home
-
Tell Alexa to start Automower®
-
Park my Husqvarna Automower during frost
-
Park your Husqvarna Automower when BBQ Scene in LUXORliving is triggered
-
Send a mail to my neighbour if Automower® has a problem.
Build your own Husqvarna Automower® and EyeOpen automations
Triggers (If this)
-
Opening
This trigger fires when the gate start opening
-
Automower® is searching for satellites
This trigger fires when your mower is searching for satellites.
-
Opened
This trigger fires when the gate complete opened
-
Automower® starts charging
This trigger fires when your mower starts to charge.
-
Closed
This trigger fires when the gate complete closed
-
Automower® has an error
This trigger fires when an error has occurred.
-
Closing
This trigger fires when the gate start closing
-
Automower® starts mowing
This trigger fires when your mower starts to mow.
-
Sensor 1 - Biitween
This trigger fires when Biitween sensor 1 triggered
-
Automower® has paused
This trigger fires when your mower has paused.
-
Sensor 2 - Biitween
This trigger fires when Biitween sensor 2 triggered
-
Automower® has stopped
This trigger fires when your mower has stopped.
-
Sensor 3 - Biitween
This trigger fires when Biitween sensor 3 triggered
-
Automover® has parked
This trigger fires when your mower has parked.
-
Sensor 4 - Biitween
This trigger fires when Biitween sensor 4 triggered
-
Automower® is leaving charging station
This trigger fires when your mower is leaving the charging station.
-
Overcurrent
This trigger fires when the gate stopped by overcurrent protection
-
Automower® status has changed
This trigger fires when your mower's status changes.
-
Photocell
This trigger fires when the gate stopped by safety device activated
-
Automower® is going home
This triggers when your mower starts to go home to the charging station.
-
Hall Sensor Abnormal
This trigger fires when the gate motor hall sensor broken

Opening
This trigger fires when the gate start opening

Automower® is searching for satellites
This trigger fires when your mower is searching for satellites.

Opened
This trigger fires when the gate complete opened

Automower® starts charging
This trigger fires when your mower starts to charge.

Closed
This trigger fires when the gate complete closed

Automower® has an error
This trigger fires when an error has occurred.

Closing
This trigger fires when the gate start closing

Automower® starts mowing
This trigger fires when your mower starts to mow.

Sensor 1 - Biitween
This trigger fires when Biitween sensor 1 triggered

Automower® has paused
This trigger fires when your mower has paused.

Sensor 2 - Biitween
This trigger fires when Biitween sensor 2 triggered

Automower® has stopped
This trigger fires when your mower has stopped.

Sensor 3 - Biitween
This trigger fires when Biitween sensor 3 triggered

Automover® has parked
This trigger fires when your mower has parked.

Sensor 4 - Biitween
This trigger fires when Biitween sensor 4 triggered

Automower® is leaving charging station
This trigger fires when your mower is leaving the charging station.

Overcurrent
This trigger fires when the gate stopped by overcurrent protection

Automower® status has changed
This trigger fires when your mower's status changes.

Photocell
This trigger fires when the gate stopped by safety device activated

Automower® is going home
This triggers when your mower starts to go home to the charging station.

Hall Sensor Abnormal
This trigger fires when the gate motor hall sensor broken
Queries (With)
Actions (Then that)
-
Start Automower®
This action will run your mower for a specified duration after which it will go back to its regular schedule. Automower® will start when the battery is fully loaded.
For AIM-capable mowers, you can also start in a specific area that you have created.
-
Open
This action will help you to open the gate.
-
Park Automower® until further notice
This action will send your mower back to the charging station where it will remain parked until manually started.
-
Close
This action will help you to close the gat
-
Resume automatic operation
This action will set Automower® to run according to its schedule.
-
Relay 1 - Biitween
This action will help you to trigger Relay 1 in Biitween
-
Pause Automower®
This action will pause your mower.
-
Relay 2 - Biitween
This action will help you to trigger Relay 2 in Biitween
-
Park Automower® until next scheduled start
This action will send your mower back to its charging station, skipping the current mowing session.
-
Relay 3 - Biitween
This action will help you to trigger Relay 3 in Biitween
-
Park Automower® for a while
This action will park your mower for a specified duration, after which it will resume according to its set schedule.
-
Relay 4 - Biitween
This action will help you to trigger Relay 4 in Biitween
-
Play Happy Birthday
This action will make Automower® play Happy Birthday.
-
Enable stay out zone
This action will enable a stay-out zone for your robotic mower, based on the AIM map created in the Automower® Connect application.
-
Disable stay out zone
This action will disable a stay-out zone for your mower, based on the AIM map created in the Automower® Connect application.
-
Toggle Headlights On
This action will set the headlights on your Automower® robotic mower to "Always ON".
-
Toggle Headlights Off
This action will set the headlights on your Automower® robotic mower to "Always OFF".

Start Automower®
This action will run your mower for a specified duration after which it will go back to its regular schedule. Automower® will start when the battery is fully loaded.
For AIM-capable mowers, you can also start in a specific area that you have created.

Open
This action will help you to open the gate.

Park Automower® until further notice
This action will send your mower back to the charging station where it will remain parked until manually started.

Close
This action will help you to close the gat

Resume automatic operation
This action will set Automower® to run according to its schedule.

Relay 1 - Biitween
This action will help you to trigger Relay 1 in Biitween

Pause Automower®
This action will pause your mower.

Relay 2 - Biitween
This action will help you to trigger Relay 2 in Biitween

Park Automower® until next scheduled start
This action will send your mower back to its charging station, skipping the current mowing session.

Relay 3 - Biitween
This action will help you to trigger Relay 3 in Biitween

Park Automower® for a while
This action will park your mower for a specified duration, after which it will resume according to its set schedule.

Relay 4 - Biitween
This action will help you to trigger Relay 4 in Biitween

Play Happy Birthday
This action will make Automower® play Happy Birthday.

Enable stay out zone
This action will enable a stay-out zone for your robotic mower, based on the AIM map created in the Automower® Connect application.

Disable stay out zone
This action will disable a stay-out zone for your mower, based on the AIM map created in the Automower® Connect application.

Toggle Headlights On
This action will set the headlights on your Automower® robotic mower to "Always ON".

Toggle Headlights Off
This action will set the headlights on your Automower® robotic mower to "Always OFF".
How to connect Husqvarna Automower® and EyeOpen
Find or create an Applet
Start by discovering an automation to connect or customizing your own. It's quick and easy.Connect IFTTT to your accounts
Securely connect your Husqvarna Automower® and EyeOpen accounts.Finalize and customize your Applet
Review your trigger and action settings. Your Applet is ready to go!
IFTTT helps all your apps and devices work better together