Connect AirTouch to SwitchBot and unlock powerful automations

SwitchBotハブ２のタッチボタンを押すことをトリガー条件として設定することが可能です。例えば：ハブ２の左ボタンを押すと、SwitchBotスマート電球をオンにします。

This trigger fires when your air conditioning is turned on.

This trigger fires when one of the touch buttons of your Hub 2 is pressed. E.g. when the left touch button is pressed, turn on SwitchBot Color Bulb.

This trigger fires when your air conditioning is turned off.

プラグミニの状態をアクション実行条件として設定できます

This trigger fires when your air conditioning mode is changed.

水漏れセンサーの水漏れ/水位低下状態をトリガー条件として設定することが可能です。

This trigger fires when your air conditioning fan speed is changed.

You can choose Plug Mini's behaviour as a trigger condition

This Trigger fires when the air conditioning home temperature rises above a specific threshold.

Whenever a preset carbon dioxide change detected, SwitchBot meter pro will try to trigger the service. E.g. if the carbon dioxide is too high, turn on SwitchBot air purifier.

This Trigger fires when the air conditioning home temperature falls below a specific threshold.

このトリガーはロボットの状態が変更した時に実行します

This trigger fires when the specific zone is turned on.

You can use the Water Detector state as a condition to trigger an automation.

This trigger fires when the specific zone is turned off.

温度・湿度の変化を検出された時、SwitchBot温湿度計（メーター）が「THAT」サービスをトリガーにします。例えば、温度が27度より高い時、SwitchBot Hub PlusでエアコンをONにします。

This Trigger fires when a specific zone temperature rises above a specific threshold.

This trigger fires when the status of your SwitchBot Robot Vacuum Cleaner changed

This Trigger fires when a specific zone temperature falls below a specific threshold.

Whenever a preset temperature and/or humidity change detected, SwitchBot Thermometer & Hygrometer (the Meter) will try to trigger the service. E.g. if the temperature is too high, turn on AC with the SwitchBot Hub Plus (the Hub Plus).

This trigger fires when the specific zone has changed to temperature control.

動体検知の結果によって、SwitchBot人感センサーがサービスをトリガーします。

This trigger fires when the specific zone has changed to percentage control.

When Motion Sensor detected motion or no motion, the SwitchBot motion sensor will try to trigger the service.

開閉状態の検知結果によって、SwitchBot開閉センサーがサービスをトリガーします。

When Contact Sensor detected door/window opened or closed or left open, the SwitchBot contact sensor will try to trigger the service.

このトリガーはロックの状態が変更した時に実行する

This trigger fires when the status of your SwitchBot Lock is changed.

This query returns a list of when your air conditioning was turned off.

This query returns a list of when your air conditioning fan speed was changed.

This query returns a list of when a specific zone temperature rises above a specific threshold. Note: this query will only return future events after this Applet is created.

This query returns a list of when the specific zone was turned off.

This query returns a list of when the specific zone was turned on.

This query returns a list of when your air conditioning mode was changed.

This action will trigger the specified Bot to turn off the switch.

This action will turn on or turn off air conditioning.

This action will trigger the specified Bot to press the switch.

This action will change the air conditioning set point temperature to a specific value.

This action will trigger the specified Bot to turn on the switch.

This action will increase or decrease the air conditioning set point temperature by one degree.

This action will ask SwitchBot Hub Plus to turn off your paired air conditioner.

This action will change the air conditioning to a specific mode.

This action will ask SwitchBot Hub Plus to turn on or set your paired air conditioner with predefined mode, temperature and fan speed.

This action will change the air conditioning to a specific fan speed.

This action will ask SwitchBot Hub Plus to turn on your paired appliance with the IR remote feature.

This action will turn on or turn off a specific zone.

This action will ask SwitchBot Hub Plus to turn off your paired appliance with the IR remote feature.

This action will turn on or turn off all zones. If turn off all zones. (If turning off all zones, make sure Spill has been set.)

This action will turn on your Plug.

This action will change a specific zone set point temperature to a given value.

This action will turn off your Plug.

This action will increase or decrease a specific zone set point temperature by one degree.

This action will ask SwitchBot Hub Plus to send an infrared signal to control TV.

This action will change a specific zone to temperature control or percentage control.

This action will ask SwitchBot Hub Plus to send an infrared signal to control any "Others" types of appliances set in the SwitchBot App. Note: Please use other actions if your appliance type is known to the App for a better experience

This action will set all zones to temperature control or percentage control.

4つの送風モードを切り替えます。

This action will change a specific zone damper opening to a given percentage.

This Action will control the SwitchBot Smart Fan.

This action will increase or decrease a specific zone damper opening percentage by 5-10%.

You can switch between 4 blowing modes.

This action will set all percentage control zones to 100%.

You can set the nightlight status of your Air Circulator Fan.

This action will set air conditioning to sleep mode.

常夜灯の明るさを調整できます。

This action will set air conditioning to away mode

You can set the Horizontal Oscillation to turn on or turn off.

This action will set all percentage control zones to a given percentage.

首振りモードを設定できます。

You can set the Vertical Oscillation to turn on or turn off.

上下の首振りモードを設定できます。

You can set the fan speed.

風量を調整できます。

このアクションはSwitchBotスマート扇風機を操作できます。

This Action will control the SwitchBot Smart Humidifier.

This Action will control the SwitchBot Evaporative Humidifier.

このアクションは、SwitchBotスマート気化式加湿器を制御します。

このアクションは、SwitchBotスマート加湿器を制御します。

Run the Scene you previously set in the SwitchBot App. Only manual execution types are allowed.

SwitchBot アプリで作成したシーンを実行します。（ご注意：手動実行するシーンのみ）

This Action will control the SwitchBot Curtain.

このアクションは、SwitchBotカーテンを制御します。

You can set the on/off state of your Color Bulb here.

本ページで電球の状態を設定できます

You can set the brightness of your Color Bulb here.

本ページで電球の明るさを設定できます

You can set the color of your Color Bulb here.

本ページで電球のカラーを設定できます

You can set the color temperature of your Color bulb here.

本ページで電球のカラーを設定できます

You can set the presets saved in your SwitchBot app here.

本ページでSwitchBotアプリに保存されたプリセットを設定できます

The robot will start vacuuming

ロボットは清掃を開始します

The robot will pause vacuuming (pause recharging)

ロボットは清掃/再充電を一時停止します

ロボットは充電に帰還します

The robot will start recharging

The robot will switch mode

ロボットは吸引力のモードを切り替えます

You can set your Ceiling Light to be turned on/off.

シーリングライトのオン/オフを設定できます

トグルシーリングライト（オン/オフ）

Toggle Ceiling Light On/Off

シーリングライトの色温度を設定できます

You can set the color temperature of your Ceiling Light here.

You can set the brightness of your Ceiling Light here.

シーリングライトの明るさを設定できます

This action will open/close Blind Tilt up or down and to a specific percentage.

ブラインドポールを特定の位置まで開ける/閉めるに設定可能です。

This Action will control the SwitchBot Air Purifier.

This Action will control the SwitchBot RollerShade.

Change water output for mopping

水拭きの水量を変更

The platform will purity in situ

The platform will purity whole house

The platform will cruise whole house

The platform will back to base station

原位置除染を開始する

家全体の浄化を始める

ハウスツアーを開始する

基地局への復帰を開始する

You can set the on/off state of your Strip Light here.

本ページでテープライトの状態を設定できます

You can set the color of Strip Light on this page.

本ページでテープライトのカラーを設定できます

You can set the Plug Mini's action

You can set the Plug Mini's action

You can set the Plug Mini's action

プラグミニの実行アクションを設定できます

プラグミニの実行アクションを設定できます

プラグミニの実行アクションを設定できます