Connect Aqara Home for EU to Genius Hub and unlock powerful automations

This trigger fires when the specified single rocker switch is turned on/off.

This trigger fires every time the zone temperature exceeds a threshold. Only zones which display a measured temperature on the app can be selected.

This trigger fires when the specified double rocker switch is turned on/off.

This trigger fires every time the zone temperature drops below a threshold. Only zones which display a measured temperature on the app can be selected.

This trigger fires when the specified Wireless Relay Controller is turned on/off.

This trigger fires every time occupancy is detected in a zone. Only zones with a Room Sensor assigned can be selected.

This trigger fires when the specified light is turned on/off.

The Trigger fires every time the zone heating turns on.

This trigger fires when the specified plug is turned on/off.

This trigger fires every time an assigned device on your system gets a low battery.

This trigger fires when the specified single rocker switch is single clicked/double clicked/long pressed.

This trigger fires when the specified double rocker switch is single clicked/double clicked/long pressed.

This trigger fires when the temperature reaches the specified value.

This trigger fires when the temperature drops to the specified value.

This trigger fires when the humidity reaches the specified value.

This trigger fires when the humidity drops to the specified value.

This trigger fires when the tvoc reaches the specified value.

This trigger fires when the tvoc drops to the specified value.

This trigger fires when the darkness is detected.

This trigger fires when the specified camera detects sounds. To use this trigger, camera's sound detection should be turned on.

This trigger fires when the specified camera detects motion. To use this trigger, camera's motion detection should be turned on.

This trigger fires when water leak is detected.

This trigger fires when the water recedes.

This trigger fires when the door and window sensor is open.

This trigger fires when the door and window sensor is closed.

This trigger fires when motion is detected.

This trigger fires when the motion is detected and brightness is below the specified value.

This trigger fires when the motion is detected and brightness is above the specified value.

This trigger fires when the cube is triggered after one-minute inactivity.

This trigger fires when the the cube was flipped

This trigger fires when the cube was pushed.

This trigger fires when the cube was rotated.

This trigger fires when the cube was tapped twice.

This trigger fires when the cube was shaken.

This trigger fires when the drop is detected.

This trigger fires when the tilt is detected.

This trigger fires when the vibration is detected.

This trigger fires when the specified curtain is fully opened/closed.

This trigger fires when single press the specified switch.

This trigger fires when single press the specified switch.

This trigger fires when fire is no detected.

This trigger fires when fire is detected.

This trigger fires when no natural gas is detected.

This trigger fires when natural gas is detected.

The battery of the device is low

This trigger fires when When Bell ringing is detected

This trigger fires when Forcible demolition alarm detected

This trigger fires when recognize the specified face

This trigger fires when recognize strange faces

This trigger fires when somebody is lingering at your doorstep

This trigger fires when the cube flip to side 1

This trigger fires when the cube flip to side 2

This trigger fires when the cube flip to side 3

This trigger fires when the cube flip to side 4

This trigger fires when the cube flip to side 5

This trigger fires when the cube flip to side 6

This trigger fires when an event is detected in the zone

This trigger fires when presence detected.

This trigger fires when absence detected.

This trigger fires when when the camera detects human.

This trigger fires when when the camera detects pet.

This trigger fires when when the camera detects package.

This trigger fires when when the camera detects unknown vehicle.

This trigger fires when when the camera recognize the specified vehicle.

This query returns a recent list of when the zone temperature fell below a certain threshold. Only zones that display a measured temperature on the app can be selected. Note: this query will only return future events after this Applet is created.

This query returns the current temperature.

This query returns a list of when occupancy was detected in a zone. Only zones with a Room Sensor assigned can be selected.

This query returns current humidity.

This query returns a list of when an assigned device on your system had a low battery.

This query returns the current motion status.

This action will wake up the specified camera.

Override a zone's temperature for a given duration.

This action will sleep the specified camera.

Override a zone to 'on' or 'off' for a given duration.

This action will wake up / sleep of the specified camera.

Override a zone's temperature for a given duration.

This action will enable motion detection of the specified camera.

Override a zone's temperature for a given duration.

This action will enable sound detection of the specified camera.

This action will disable motion detection of the specified camera.

This action will disable sound detection of the specified camera.

This action will enable / disable motion detection of the specified camera.

This action will enable / disable sound detection of the specified camera.

This action will turn on/off the plug of your choosing.

This action will turn on/off the single rocker switches or module of your choosing.

This action will turn on/off the double rocker switches or module of your choosing.

This action will turn on/off the wireless relay controller of your choosing.

This action will turn on/off the light of your choosing.

This action will open the curtain of your choosing.

This action will close the curtain of your choosing.

This action will open/close the curtain of your choosing.

This action will stop the curtain of your choosing.

This action will open the curtain of your choosing to the designated position.

This action will make feeder feed once

This action will set the color of the light

This action will Turn on/off the light of your choosing.

This action will run the light scenario